Week 3 part 2 - testing

A project log for 25in24 Electronics Project Board

Re-vitalizing and modernizing a Radio Shack 65in1 kit for educational purposes - my DesignLab Residency!

tom-thoenTom Thoen 03/14/2024 at 23:140 Comments

Well, initial testing was more difficult than expected - took about five hours just to get a couple of basic circuits working.  Made a number of incorrect assumptions / mistakes including:

Finally found out my resistor board PCB traces had not been routed 100%.  Yikes!  After re-soldering the board a couple of the projects are finally working.  Next step is to get a number of them fully tested and documented...

Project # 1 test - tone generator :-)