EVER WANTED TO PRINT YOUR OWN ROBOT BUT YOUR 3D PRINTER ISN'T BIG ENOUGH!
THIS WILL BE THE SOLUTION!!!
I'm building a complete redesign from the original Thor robotic arm from AngleLM.
It will be a 1:3/4 smaller model made with servomotors, it will be controlable with serial
2 servo's for base, 2 servo's for shoulder, 1 servo for arm, 1 servo for wrist and
2 servo's for the tool movement.
1 small servo for the gripper and neopixel led ring.
1 Pololu Mini Maestro 12-Channel USB/SERIAL Servo Controller
1 Arduino Mini
02/12/2017 at 16:08 •
Just started the design, all parts @home :-)
Minimum work area 145x145x120 to print all parts.
- Now some SLA printers can be used!
- Most FDM printers will have this as minimum work area.
All feedback will be welcome.
View project log
Enjoy this project?