On the first day, we tried to find what improvements we could bring to the egg breaker. We first tried to see what the problems were and we thought the object was pretty unstable and that the two wings were hard to hold for someone who hasn't enough strength in their hands. That's why we came up with the idea to add a base to hold the egg breaker and some holders on the wings that will help people using it to push the wings. 

So we made sketches to realise what our project would look like. 

We made a first sketch with holders on the base linked to arms which were made to push the wings.

But we thought it wasn't the most practicle way to do it.

That is why we kept the base and the principle of the holders but we added the holders directly to the wings.

That way it will be easier for people to push the wings.

On our second day, we tried to do the base of the egg breaker with the software fusion 360.

On our third day, we visited the FabLab and got to learn about all the machines there. We also contacted Youssra to send us a photo of her egg breaker so that we can have the measure and print in 3D the base that we did on fusion 360. So that for the next session she can test it and tell us her opinion about this new prototype.

After the third day, we didn't receive any answer from Youssra and because we didn't have the egg breaker with us, we weren't able to take the measurements and start creating our project. So during this session, we thought of the materials we could use. We thought we could use the 3D printer to make our base but we are not sure it will be strong enough to hold the egg breaker so we have to make tests.