Close
0%
0%

Raspberry Pi CM0IQ

Tiniest Raspberry Pi board, measuring just 42x36mm! CM0IQ board is based on Raspberry Pi/EDATEC CM0 Compute module

mbsmbs
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
68 views
3 comments
1 followers
View Gallery
Tiniest Raspberry Pi board, measuring just 42x36mm! CM0IQ board is based on Raspberry Pi/EDATEC CM0 Compute module Features Raspberry Pi CM0 Lite: - 1GHz quad-core 64-bit Arm Cortex-A53 processor - 512MB SDRAM - H.264/MPEG-4 video decoding, 1080p@30fps - H.264 encoding, 1080p@30fps WiFi with extermal antenna connector USB type-C for power and gadget mode USB-A HDMI type D (micro HDMI) DSI 4-lane CSI 4-lane 40-pin GPIO connector, 1.27mm pitch SD-card holder 5V solder pads M2 x4 standoffs for mounting the board

Enjoy this project?

Share

Discussions

namnam wrote 05/08/2026 at 03:34 • point

Good job mbs!

  Are you sure? yes | no

Razvan Pop wrote 05/07/2026 at 09:29 • point

Really nice ! Congrats ! 

  Are you sure? yes | no

mbs wrote 05/07/2026 at 10:15 • point

Thanks!

  Are you sure? yes | no

Similar Projects

The PI-2230-SSD is an SSD expansion board for Raspberry PI 5, it can provide PCIe to M.2 NVMe SSD function
Project Owner Contributor

PI-2230-SSD

xiaoj329Xiaoj329

Combining the Raspberry Pi Zero 2 W, a Pi Platter expansion board and a 1024x600 pixel HDMI touchscreen in an easy-to-build portable.
Project Owner Contributor

Porta-Pi - A portable large-screen Pi Zero 2 W rig

dan-julioDan Julio

Buy the Raspberry Pi Zero W V1.3 Development Board at the Best Price only at Robu.in
Project Owner Contributor

Raspberry Pi Zero W V1.3 Development Board

akanzler007akanzler007

Pi Pico breakout with screw terminals and prototyping area for my projects
Project Owner Contributor

Raspberry Pi Pico Breakout Board

eric-wiiliamEric Wiiliam

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Raspberry Pi CM0IQ", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.