Close
0%
0%

Arduino based Flashlight

ATTiny controlled LED flashlight

Similar projects worth following
*Atmel ATTiny85 Microprocessor based design
**Programmed from the Arduino IDE.
**Part is less than $1 in volume from Mouser
*Software/Hardware Controllable functionality
**Controllable brightness or On/Off control via analog/digital input pin
***Potentiometer can be used to control brightness level (analog)
***MicroProcessor can be used to control On/Off (5V signal level)
***Can be re-configured via software download
***Software control can allow for smoother functions like blooming on/off (digital on/off mode)
*Power Compatibility
**12V operation matches available RepRap electronics power
**12V to 5V Regulator for ATTiny85 power
*ISP Connector so the program could be downloaded on card (the ATTiny can be soldered in without a socket)

Enjoy this project?

Share

Discussions

teraz wrote 11/23/2021 at 16:22 point

nice, is possible add receiver?

for example flaslight as sender data and small camera, meybe with monocular as receiver

and pppd protocol ;D

  Are you sure? yes | no

George Gardner wrote 03/30/2018 at 08:58 point

but why?

  Are you sure? yes | no

mr.jb wrote 07/25/2014 at 10:03 point

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates