Prepare(Prepare AnanasStepper include Power wire and CAN bus wire)

BOM:

1. Ananas(AnanasStepper 20)
2. Step Motor (2 phases-step-motor)
3. Magnet
4. Mount Space (a 3D printer part)
5. Screw(4 Screw)
6. Nuts(4 Nuts)
7. Motor Wire
8. Power Wire
9. USB-CAN(or SPI-CAN)

Assemble Magnet And srew

1. a.Assemble the 3D printed spacer.
2. b.Assemble the Ananas.
3. c, Final assemble the Nuts.

Connect AnanasSteppers(Power and CAN bus)

First, Prepare All wires.

Connect them follow the arrows.

RUN Them!

Then, Power AnanasStepper Up!!

Configure AnanasStepper (On PC or others hardware supported) though CAN Bus.

Enjoy!!!!!!