Get the components we recommended or some alternatives for them.

Prepare Arduino Uno board for connection.

Connect RFID device to Arduino board as follows for the code to work:

• 3.3V RFID pin to Arduino 3.3v;
• RST pin to Arduino pin 9;
• GND pin to Arduino GND pin;
• IRQ is not connected;
• MISO pin to Arduino pin 12;
• MOSI pin to Arduino pin 11;
• SCL pin to Arduino pin 13;
• SDA pin to Arduino pin 10.

Connect the LCD interface to Arduino board as follows:

• 5V LCD pin to Arduino 5v;
• GND pin to Arduino GND pin;
• SCL pin to Arduino analog pin A5;
• SDA pin to Arduino analog pin A4;

Load the Arduino code provided after properly installing the libraries on your system:

https://github.com/adafruit/Adafruit_LiquidCrystal

The device is ready to use by approaching the chip and print on the LCD the required message.