06/03/2017 at 17:55 •
The 3mm thick acrylic cuts for the enclosure have arrived from Pololu, and it seems everything's fitting together nicely. Just waiting for the 6mm cuts now.
04/24/2017 at 16:25 •
My PCBs are finally back from the DirtyPCBs fab and the quality is surprisingly excellent! I soldered one up, and the USB, encoders, and Neopixels all seem to be working nicely. The encoder inputs still had a little bounce despite the analog debounce filter I put in, which was a little disappointing. I wrote up a quick and flexible debounce service for the encoders and buttons here, instead.