• Deeeemooo

    davedarko06/03/2017 at 14:37 4 comments

    The blue is still a bit too strong, even with a 1k resistor.. meh. (edit: progger runs on 5v, not the tested 3V3 :D )

  • Binary sunset

    davedarko06/03/2017 at 12:24 0 comments

    checking resistor values. Yellow gets 100 ohms, blue 1k ohms.

  • considerations for REV2

    davedarko05/09/2017 at 08:26 0 comments

    As soon as I've had send the board, I just knew that new ideas would flood in. Here's a list of improvements for the board.

    • bad pin planning: could have spared the RX/TX line and add an "FTDI" pinout, this way I need to program via ISP only
    • add a transistor to the ground of the LEDs for dimming
    • add a photo resistor for checking light of environment

  • picture added

    davedarko05/09/2017 at 08:21 0 comments

    I've added a size mockup with some 10mm LEDs I still have from other projects. The ones I've bought for this project look more like this: