2 |
× |
Plates
2 aluminum plates, 1/4" 6061, cut to 6.75x7. Would be nice to waterjet (or otherwise cut) into arches.
|
2 |
× |
Top Rods
5/8 aluminum rods, cut to 11" with 5 notches in center spaced by 1" Axially tapped for 1/4-20
|
2 |
× |
Bottom Rods
5/8 aluminum rods, cut to 11" axially tapped for 1/4-20. Actually I used 1/2" bc I ran out of 5/8 rod.
|
1 |
× |
Epoxy
Locktite "extra time" epoxy
|
5 |
× |
String
Polyester uncoated lacing braid. Mil Size 5. LT2-S5-FA-NT. Availiable from wirecare.com
|
5 |
× |
Balls
1" diameter steel bearing balls. Colored by heating with propane torch.
|
5 |
× |
Nuts
5/16 nuts (1/2" flat-flat) Drilled thru opposing flats to make hangers
|