Close
0%
0%

eHive

Device that monitors weight, temperature and humidity inside the beehive. Also counts bees coming in and out and send the data trough LoRa.

alfredo-lhommeAlfredo L'Homme
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
2k views
4 comments
20 followers
View Gallery

Welcome to project Connected Beehive, an open-source connected beehive meant to improve the daily lives of beekeepers as well as bees.

First of all, what is a connected beehive?

It is actually more of a connected sensor kit than a connected beehive. It is a device containing a scale and other sensors to be attached to a beehive in order to gather the most data possible about the hive. This includes the weight of the beehive, the outside/inside temperature or humidity, the number of bees going in and out of the hive, etc...
All of this data is then sent to a platform accessible to both beekeepers and researchers, allowing beekeepers to monitor their hives' well being, and researchers to gather more data about bees.

Why is it needed?

Bee population has been decreasing a lot during the last decade, and scientists have been trying to find out the causes of this decline. Gathering data about bees in different places is the only way for researchers to find precise causes for this. Our team wants to connect beekeepers and researchers as much as we can, by creating this platform accessible to both, and maybe by citizens as well. All of our plans and access to the servers will be open-source and thereby accessible to everyone.

rec_lora.ino

Code for Adafruit Feather 32u4 LoRa Radio (RFM9x) to use it as a receiver. It sends the received data through serial communication.

x-arduino - 2.73 kB - 08/09/2017 at 10:40

Download

trans_lorafeather.ino

Code for Adafruit Feather 32u4 LoRa Radio (RFM9x) - collect the data from weight, humidity and temperature sensors and sends it to a receiver LoRa Feather.

x-arduino - 3.77 kB - 08/07/2017 at 14:42

Download

lora_to_wifi.ino

Code for Adafruit Huzzah Feather ESP8266 - sends the data received from LoRa feather to the server, via WiFi

ino - 2.46 kB - 08/07/2017 at 12:54

Download

scale_calibration.ino

Arduino code for calibrating the scale, and finding the calibration factor to put in the beehive_sensors.ino code

x-arduino - 2.82 kB - 07/31/2017 at 14:38

Download

  • 1 × Temperature remote sensor DS18B20
  • 1 × Local temperature & humidity sensor Adafruit si7021
  • 1 × Humidity sensor DHT22
  • 1 × 200kg scale 0.1 precision
  • 2 × LoRa feather Adafruit Feather 32u4 RFM9x LoRa Radio

View all 6 components

  • Open Connected Beehive

    tanguy chotel • 07/31/2017 at 14:42 • 0 comments

    Progress Report - 24 July

    What we've done

    Preliminary research on:

    • Bee biology & global change
    • human-produced electromagnetic fields & bee navigation/ communication
    • pesticides, parasites, and pathogens

    Interviewed beekeepers and researchers in order to:

    • Better understand the users' needs
    • Gauge how realistic the proposal is
    • Collect input from experts in the field and modify the project accordingly

    Implemented temperature, humidity, and weight sensors:


    IMG_0698.jpg4032x3024 2.86 MB



    Began building a Node.js web platform to display and analyze data in real time as it is sent from the sensors. Current interface design (liable to change):

View project log

  • 1
    Connecting a Lora Feather to the sensors

    Wireless LoRa feather transmitter (A) hooked up to remote temperature probe (B), temperature & humidity sensor (C), and load cell amplifier (D), which is connected to scale sensors by load combinator (shown below)


    To program the microcontroller (LoRa Feather) and use the sensors we used the Arduino IDE platform. In order to do that, some libraries a

View all instructions

Enjoy this project?

Share

Discussions

miro.nikoletic wrote 11/16/2019 at 18:01 • point

Is this eHive project still alive

  Are you sure? yes | no

Duane Brantley wrote 10/10/2018 at 17:22 • point

Hi Alfredo,

I am/was about half way into doing the exact same thing when I ran across your project.  how are things working?  Communication good between everything?  About the only thing I see I'll be doing a little different is I'll be using an ESP32 for WiFi instead of an ESP8266.  Did you run into any kinks along the way?

Thanks,

Duane

  Are you sure? yes | no

Beekeeper wrote 04/04/2018 at 07:49 • point

I like this project. On behalf of our beekeeper community I have a request.
Unfortunately, we haven't a WiFi connection in the field where are the hives, but the opportunity to use a public LoRa Gateway to send the data via OTAA. Sounds simple. But regarding to modify the scetch we would like to ask you to help us. Thank you in advanced.  :-)

  Are you sure? yes | no

Alfredo L'Homme wrote 04/04/2018 at 15:30 • point

Hey, I'm glad that you are interested in using this technology! Check out our project's github which I think it has more information about the setup; https://github.com/rweinberger/eHive

I've sent you my email so feel free to ask whatever pops out in your mind. All the best of luck with your bees and have fun building smartly :)

Bests,

Alfredo

  Are you sure? yes | no

Similar Projects

The goal is to build a low cost and open-source platform to gather and analyse critical data from the sea.
Project Owner Contributor

OMNI - Ocean Monitoring Network Initiative

designlabacdesignlab.ac

An all in one air quality and environment detector powered by esphome, include PM2.5, CO2, Temperature.
Project Owner Contributor

AirCube - All in 1 Air Quality Monitor

easydiyeasydiy

An edge device to collect, store, analyze and react to IoT Data, plus sensors
Project Owner Contributor

EDGE IoT DATA COLLECTION DEVICE

david-g-simmonsDavid G. Simmons

An embedded data recorder for High Altitude Balloons.
Project Owner Contributor

FlightCPU

jeremyJeremy

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "eHive", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.