Close
0%
0%

iPod Nano gen6 LCD Breakout

A breakout board to connect the iPod Nano gen6 LCD to an FPGA

Similar projects worth following
A project which summarizes and continues on from the excellent Mike's Electric Stuff blog, where he details the reverse engineering and development of a MIPI DSI video generator for the iPod Nano v6 LCD.

Mike Harrison did all the heavy lifting. I just developed this small breakout board based on his notes and will develop an FPGA-agnostic VHDL core to encode image data into a MIPI data stream suitable for this device. The hardware is released under a CC BY-NC-SA license and the source is released under GPLv2.

There are no plans to support the digitizer interface at this time.

You can read more about the project at https://www.mixdown.ca/redmine/projects/ipodnano6breakout.

Enjoy this project?

Share

Discussions

Mike wrote 09/13/2014 at 19:56 point
Hello!
I try to repeat Mike's projects and just wanted to know. Is your development board fully functional?

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates