Close

Getting started with Machinekit

A project log for Arcus-3D-C1 - Cable 3D printer

3D printable, Open Source Hardware, tripod kinematics, cable driven 3D printer

Alexander RösslerAlexander Rössler 12/13/2017 at 06:180 Comments

Getting Machinekit up and running with Debian Stretch on the BeagleBone Black was a little hard, so I did a write up about how to create a Machinekit image with Debian Stretch for the BeagleBone Black on my blog. Check it out if you want to get started quickly.

Discussions