Din rail mount for Arduino UNO

Din rail / cap rail enclosure and breadboard for Arduino UNO, Yun rev2, Nano, Wemos D1, Genuino 101 ....

hwhardsoft

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

View Gallery

Description

Do you want to install your Arduino project in a control cabinet? May this project can help you.
This enclosure is not only suitable to house an Arduino board and mount it to a DIN rail. It comes with a breadboard and a voltage regulator for 5V DC . Along the edges of the proto area, all the IO and power pins are connected and marked. Furthermore you can stick an Arduino shield to the main board. You can connect your work via terminals with the world ouside the enclosure.

Details

milled cab rail enclosure
transparent top shell
for EN50022 DIN rails
prototyping plate - fits perfectely in the enclosure
all Arduino pins are connected to marked pins beside the breadboard
1x 2-pin terminal blocks
4x 3-pin terminal blocks
sockets for the Arduino Uno, 101 and zero
sockets for an optional shield (directely conneted to the Arduino)
pcb contains a layout for a 5V/1.5A voltage regulator
optional reset button (reachable via openings in the enclosure)
for Arduino Uno, 101 and zero (and compatibles), Nano, YUN rev2, ....

Files

Application Note RS485 Rev A.pdf How to integrate a RS485 interface Adobe Portable Document Format - 360.59 kB - 09/01/2017 at 17:50	Preview	Download

Construction manual ArduiBox rev A.pdf Assembly instruction Adobe Portable Document Format - 430.21 kB - 09/01/2017 at 17:49	Preview	Download

Datasheet ArduiBox Rev A.pdf Datasheet / Description Adobe Portable Document Format - 448.71 kB - 09/01/2017 at 17:49	Preview	Download