Sacrifices have to be made

A project log for Lasercut, UV laser PCB printer

Couldn't fit another laser into the name

JLAMJLAM 10/21/2017 at 18:490 Comments
Got this printer for free at a computer surplus store. Time to rip out the slide and remodel the laser cutter  to accept what ever weird and wonderful mounting they chose to use in this printer. A few hours later, it is evident that the old design is going to need to change. The linear axis of the printer was built into the chassis. So the whole laser printer is now going to be remodeled into the printer carcass. On the plus side, there is now plenty of room for the electronics.