WM-100-Duino

Description

The WM-100-Duino board have an ATMEGA256RFR2 with IEEE 802.15.4 2.4 GHz embedded radio and was designed to have 2 antennas for diversity with a 24dBm PA/LNA. The board have a I2C network with MPL115A2 altimeter, a VCNL4010 luminous sensor, CC2D33S humidity sensor and ATSHA104 criptographic accelerator.

The WM-100-DUINO has the same Arduino-UNO pin out. The main diference is the power source extended from +0.9 to +6.5V. It can works with a single AA battery up to 3 AA. The wireless communication can be used with 3 different communication stacks: LwMesh, IEEE-802.15.4 e ZigbeePro, but only LwMesh was the only released.

With this board is possible to have true IoT MESH device with full open source code directly into Arduino IDE with 5 demos:

- SimpleRemote: Blink a LED remotely
- PeerToPeer: UART by wireless
- EDemo: Energy Scan
- WSNDemo: Wireless Sensor Network
- Sniffer: IEEE 802.15.4 sniffer directly into Wireshark

Files

Cop-USB-USART-avr.hex Co-processor USB <-> USART bridge. MD5: 7e425433a85e37b68372ab7eefbce53a hex - 49.83 kB - 09/26/2017 at 02:58		Download
xmega_small_PORTC2.hex DFU bootloader for xmega32a4 with pin PORTC.2 check. To enter press DFU button before plugging at USB port. MD5: 04de9921521fb853b616f9aa0451beae hex - 10.88 kB - 09/25/2017 at 22:07		Download
WM-100-DUINO-BOM.xlsx sheet - 13.94 kB - 09/24/2017 at 15:36		Download
WM-100-DUINO-v1.0-gerbers.rar RAR Archive - 542.84 kB - 09/24/2017 at 15:34		Download
WM-100-DUINO-v1.0.pdf Schematic including 3D view. application/pdf - 1.09 MB - 09/24/2017 at 16:22	Preview	Download

WM-100-Duino

Become a Hackaday.io member

Just one more thing

Description

Files

Cop-USB-USART-avr.hex

xmega_small_PORTC2.hex

WM-100-DUINO-BOM.xlsx

WM-100-DUINO-v1.0-gerbers.rar

WM-100-DUINO-v1.0.pdf

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member