close-circle
Close
0%
0%

Propeller Development Board

Simple Parallax Propeller development board.

Similar projects worth following
close
This is my own version of a Parallax Propeller development board.

Uses a PIC microcontroller for the USB-Serial interface, can be powered from either USB or a dedicated power source, includes an EEPROM to store the program and data, and provides a 2x20 pin header exposing all 32 I/O pins from the Propeller microcontroller, power and control lines.

Compatible with all standard Propeller development tools.
  • 2 × Resistor 4.700 ohm 1/4 watt
  • 3 × Resistor 220 ohm 1/4 watt
  • 1 × 24LC512 Memory ICs / EEPROMs
  • 1 × PIC18F14K50 Microprocessors, Microcontrollers, DSPs / Microcontrollers (MCUs)
  • 1 × LM1117T-3.3 Power Management ICs / Linear Voltage Regulators and LDOs

View all 19 components

Enjoy this project?

Share

Discussions

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates