sch - 432.60 kB - 04/08/2018 at 17:05 |
|
|
brd - 72.54 kB - 04/08/2018 at 17:05 |
|
|
sch - 367.32 kB - 04/08/2018 at 17:04 |
|
|
brd - 173.87 kB - 04/08/2018 at 17:04 |
|
|
Circuit_Eagle_FP2_QuiteSomeLEDsAddon_Rev.1.pdfPDF of the circuit (eagle) for the QuiteSomeLEDsAddon (Rev.1) for the DIY-shieldAdobe Portable Document Format - 156.53 kB - 04/08/2018 at 17:01 |
|
|
QSLA_PONG_FP2_PRECOMPILED.hexprecompiled hex-file for the Pong-Game ( played with the QSLA-addon on the DIY-shield)hex - 36.37 kB - 04/08/2018 at 16:57 |
|
|
Circuit_Eagle_FP2_OLED-addon_Rev.1.pdfCircuit of the OLED-addon for the DIY-shield in EagleAdobe Portable Document Format - 53.96 kB - 04/08/2018 at 16:54 |
|
|
QSLA_PONG_FP2.inoArduino-file for the Pong-Game ( played with the QSLA-addon on the DIY-shield)ino - 7.63 kB - 04/08/2018 at 15:58 |
|
|
cover_tinkering_area_lower_part_Rev.1.gcodeGCODE of the lower part of the cover for the tinkering area (for normal and special cover of the DIY-shield)gcode - 681.57 kB - 03/19/2018 at 18:25 |
|
|
cover_tinkering_area_upper_part_Rev.1.gcodeGCODE of the upper part of the cover for the tinkering area (for normal and special cover of the DIY-shield)gcode - 93.52 kB - 03/19/2018 at 18:25 |
|
|
cover_tinkering_area_Rev.1.stlSTL-file of the cover for the tinkering area (for normal and special cover of the DIY-shield)Standard Tesselated Geometry - 99.01 kB - 03/19/2018 at 18:25 |
|
|
Circuit_Eagle_FP2_DIY_Shield_Rev.1.pdfPDF of the circuit (eagle) for the DIY-shield (Rev.1)Adobe Portable Document Format - 79.23 kB - 03/13/2018 at 16:15 |
|
|
DIY_Extension_FP2_Case_Special_Version_Rev.1.stepspecial version of the case for the DIY-shield (FP2) with a window ( + the right cover for this slot )step - 2.81 MB - 03/13/2018 at 16:15 |
|
|
DIY_Extension_FP2_Basics.hexprecompiled version (26.02.18 16:04)hex - 25.00 kB - 02/26/2018 at 15:03 |
|
|
Hallo_World_DIY_Extension_FP2.ino"HalloWorld"-Arduino-sketch for the DIY-shieldino - 1.70 kB - 02/21/2018 at 09:48 |
|
|
DIY_extension_FP2_Case_Rev.4.stlnew version of the case for the DIY-shield:-> more space for e.g. QI-charger -> less material Standard Tesselated Geometry - 4.10 MB - 02/21/2018 at 07:26 |
|
|
Fairphone_Extension_DIY_Shield_Rev.1.schcircuitfiles for eaglesch - 789.98 kB - 01/30/2018 at 15:11 |
|
|
Fairphone_Extension_DIY_Shield_Rev.1.brdboardfiles for eaglebrd - 157.14 kB - 01/30/2018 at 15:11 |
|
|
DIY_extension_FP2_Case.stepStep-files of the case for my DIY extension boardstep - 2.75 MB - 01/30/2018 at 15:04 |
|
|
Touch_Extension_FP2.inoArduino-sketch for basic functions of the touch-extensionino - 3.38 kB - 01/01/2018 at 20:33 |
|
|
Fairphone_Cap.Buttons_Rev.1_Circuit.pdfPDF of circuit for the cap. buttons shieldAdobe Portable Document Format - 67.28 kB - 01/01/2018 at 20:09 |
|
|