3D printed wrist-mounted flamer thrower

This is a simple 3d-printed wrist-mounted flame thrower I designed and built over the course of a week.

Steve Hernandez

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

4.4k views

2 comments

14 followers

19 likes

View Gallery

Description

I used the solenoid valve from a Glade air freshener to control the disbursement of butane . I used a 300kV boost coil to generate a continuous spark. A single button triggers the release of butane through the solenoid and the spark. I mounted the entire assembly to a leather wrist-guard.

Details

https://www.dropbox.com/s/5attoi3sost56rw/2017-11-11%2004.51.28.mp4?dl=0

Files

2017-11-11 04.51.28.mp4 Printing! MPEG-4 Video - 26.14 MB - 11/15/2017 at 18:35		Download
2017-11-12 22.30.10.mp4 Spark gap test MPEG-4 Video - 19.71 MB - 11/15/2017 at 18:35		Download
2017-11-12 22.40.24.mp4 Test of the solenoid valve and butane MPEG-4 Video - 19.83 MB - 11/15/2017 at 18:35		Download
flamer2.scad Here is the openscad project file scad - 6.30 kB - 11/15/2017 at 18:34		Download

Discussions

tender57 wrote 12/29/2023 at 22:26

I know this is from years ago but this air freshener no longer exists. Almost all are motor-controlled.

Are you sure? yes | no

Crypto [Neo] wrote 11/15/2017 at 20:29

This project is awesome but you really need a flashback arrestor to make this 100% "safe" to use. I don't think the risk is high considering the flowrate but in any event it'll save your arm if an errant flame manages to get back up the line.

Are you sure? yes | no

Similar Projects

A 3D Printed Halloween Themed "Do Nothing Box".

3D printed wrist-mounted flamer thrower

Description

Details

Files

2017-11-11 04.51.28.mp4

2017-11-12 22.30.10.mp4

2017-11-12 22.40.24.mp4

flamer2.scad

Discussions

Similar Projects

RIP Skeleton

Simple Ventilator Air Supply

3D printed IOT box using edison

TOOL FOR SANDING THE INSIDE OF THE PIPE

3D printed wrist-mounted flamer thrower

Become a Hackaday.io member

Just one more thing

Description

Details

Files

Enjoy this project?

Discussions

Become a Hackaday.io Member

Similar Projects

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member