Tracker using ATmega with added EEPROM Storage capabilities

Similar projects worth following
Using Atmega MCU , GSM and GPS to build a tracking system.
UPDATE: EEPROM and SD card slot added for device status and configuration storage, Buzzer added and a couple of other improvements
  • 1 × Atmega1284p Microprocessors, Microcontrollers, DSPs / Microcontrollers (MCUs)
  • 1 × SIM800L MODULE
  • 1 × GPS MODULE
  • 1 × Power modules
  • 1 × A couple of capacitors

View all 10 components

View all 2 project logs

  • 1
    Prototype Stage

    1. Build a prototype on some breadboard or in my case prototype boards

  • 2
    Pilot Stage

    Test your tracker and relocate it to a vehicle and track the movements.

    debug every single challenge encountered whist improving whatever u can.

  • 3
    Tracker Design

    Now Build a new Tracker from the bottom up.

    piecing together individual components and coming up with a complete PCB that can be manufactured and assembled.

    Manufacture The board and assemble the components

View all 4 instructions

Enjoy this project?



Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates