Quantity   Component name
1 × Teensy 3.1 This controller was selected because of the built in USB-HID
2 × Small Momentary Push Button The little red ones on the front of the Pinbox Jr.
2 × Large Momentary Push Button The two larger ones on the side.
3 × Small Breadboard 2 general use small boards, 1 power rail board
1 × A Box The one used for the first Pinbox Jr. was an Adafruit shipping box!
1 × 3-Axis Accelerometer Pinbox uses the MMA8452Q breakout from Sparkfun which talks to the Teensy over I2C