Piezo Haptic Flex Module

Drives high voltage Piezo Haptic feedback devices by i2c. For sale on Tindie.

Similar projects worth following
The DRV2667 based board drives high voltage Piezo haptic motion devices.

Designed to drive Piezo Haptic devices, it generates up to 200Vpp. Castellations are spaced for safety. It is not recommended that the output is routed through a breadboard.

Any software related will be released under BSD or MIT license. SAAS or cloud based software will be AGPL.

Creative Commons License

  • 1 × DRV2667 Evaluation, Demonstration Kits, Boards and Modules / Evaluation Kits, Boards and Modules

  • Still working on drivers

    Chris Hamilton08/17/2015 at 19:24 0 comments

    We have stubbed out some of the functions, but it will be a few more weeks before we have a working driver.

  • High voltage warning

    Chris Hamilton08/17/2015 at 19:24 0 comments

    The actuator and the board have a minimal risk, but it is important that care is used when mounting them in wearables.

  • Samsung actuators

    Chris Hamilton08/17/2015 at 19:23 0 comments

    We have allocated some and will be selling them with the modules.

  • Testing

    Chris Hamilton04/04/2015 at 18:01 0 comments

    I have built a few of these modules to test. I did not provide enough spacing from the high voltage to near components. I have updated the design, though they are safe enough for testing in a normal environment. We may finish these with a silicone conformal coating for extra safety.

View all 4 project logs

Enjoy this project?



Yuri Klebanov wrote 01/17/2016 at 14:48 point

I made a library and a quick instructable for this breakout-board:

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates