Close

So it found it's destination...

A project log for Photobooth Control and Display

This project features Arduino compatible devices which connect to a PC and a camera

stefan-xpStefan-Xp 06/15/2015 at 18:430 Comments

Finally this Saturday the Photobooth was used the first Time :)

The Footobooth from below the Fotoposition:

The Photobooth in use:

Finaly the Setup consists of the 7x5 LED Board, The Plywood/Acryl housing, the Aluminium profiles, 3 Daylight Lamps and the Canon EOS 400d.

Fazit:

On the plus side:

On the minus side:

Discussions