Close

1337 c0nn3kt0r sk1llz

A project log for 1337 3310 tool

An hacker's swiss knife in the form factor of the best phone ever

Mastro GippoMastro Gippo 12/26/2014 at 18:092 Comments

20141226_184246

Well, today I started testing the analog input circuitry. As you can see, I'm soldering wires directly from resistors to the connector. The casual observer may see this as being too lazy to route a proper connector on the PCB, but it's really a very sophisticated way to relieve stress on the connector! :P

I also had to add a bodge flyback diode to the buzzer, as I forgot to include one... That's the second error on the PCB: the other one is taking for granted that I could put two green LEDs in series. I'm too used to modern, super efficient LEDs, but since I'm reusing the original Nokia 12 years old LEDs, they need a bit more current and seem to have an higher forward voltage than the ones I use everyday.

Discussions

Mastro Gippo wrote 01/03/2015 at 15:21 point

Thanks! :) I've always wanted this thing too, so I decided to get the
idea out of the drawer to participate in the Trinket contest... Who
knows, maybe one day I'll sell it as a kit! :)

  Are you sure? yes | no

j0z0r pwn4tr0n wrote 12/28/2014 at 04:25 point

Great work, this is something I have always wanted for my super-spy kit, although I don't have the skills to put as much thought and work into it as you have already. I can't wait to see the finished product!

  Are you sure? yes | no