Quantity   Component name
1 × Hackaday.io branded Trinket chip thingy Its cool, USB n stuff..
2 × HC74595 Shift Resgister I have seven but only used two so far
5 × 100 ohm resistors I know, a little measley for current limiting but hey it works :D
7 × S5880 Transistors High current General Purpose, used as a buffer to protect Trinkys lil' pins
8 × 5 x 7 LED Matrix Display Can't find any docs on it, this pin configuration though: http://extremeelectronics.co.in/images/shop/led_dot_matrix_display_5x7_diagram.jpg
1 × Light Dependent Resistor Connected to to one of the Trinkets neat Analog Only Pins, for saving batteries in bightness.
1 × 10K Ohm Resistor To make a voltage divider with the LDR.
5 × A1300 Audio Frequency Power Amplifier Transistor.... I dunno, they were in the clock so I used them as buffers for the Matrix anodes.
1 × 2 part Epoxy I think.I have the gorrilla brand.
56 × Tiny square studs Whatever size looks good to you
56 × Tiny square mirrors Get ones that will glue nicely to your studs.
1 × Assorted pins and buttons. Whatever you think looks good, check my pics!