Close
0%
0%

Mr Hoverboard

A Hoverboard you can make at home for less than $500

Similar projects worth following
UPDATE 10/4/15

The road from prototype to manufacturable product was an overwhelmingly surprising journey. It tested my patience repeatedly, but I finally found a way to make this available to those who don't have the skills to make one themselves. I know to a lot of people here think this sort of thing is old hat, but I'm happy to bring this amazing technology to new audiences.

http://bit.ly/1LcMOAk

Thanks,

Ryan aka Mr H




Plans at
http://mrhoverboard.com/blog/

www.MrHoverboard.com
Twitter: @Mr_Hoverboard
Instragram: #MrHoverboard
Facebook: Facebook.com/MrHoverboard
Gmail: MrHoverboard@gmail.com

Video Proof Here

http://youtu.be/8dflaK2OgNg

  • 1 × Plywood 1/2" thick, 4'x4'
  • 1 × Skateboard Deck 30"+
  • 1 × Shower Liner Peva is the best I've found so far but still need to test some of the heavier guage vinyl
  • 2 × Coffee Can Lids Other lids work too, size depends on disc size. Just make sure it's thin enough to staple through.
  • 1 × Gaffers Tape Not always available at hardware stores. I used Rock N Roll Rentals in ATX

View all 19 components

  • 1
    Step 1

  • 2
    Step 2

  • 3
    Step 3

View all 12 instructions

Enjoy this project?

Share

Discussions

Androiders wrote 12/17/2014 at 13:11 point
That video is soooo coool :)
Great job, great idea!

  Are you sure? yes | no

MECHANICUS wrote 12/13/2014 at 22:11 point
Hey IH8UKULELE sent you an email.

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates