Close
0%
0%

Servo Clock

A special Clock witch is build with 22 Servos instead of LEDs at a 7-segment display.

Similar projects worth following
I0m USing an Arduino MEGA to drive all of the 22 Servos. In fact that the Arduino MEGA only could drive 2 Servos at the same time, I decided to controll 1 servo by one. This makes a cool look of the Clock. The time is given by a small RTC-module.
  • 22 × Tover Pro Servo
  • 1 × Arduino MEGA
  • 1 × RTC-Module
  • 1 × Front Plate Custom milled by my brother
  • 12 × Long Plates

View all 7 components

Enjoy this project?

Share

Discussions

biberger wrote 08/08/2019 at 19:54 point

some years ago i found this on a watch page.

i think its interesting to share this watch here.

https://youtu.be/Nc3LHtynOLA

https://youtu.be/ICFm-5OnRYo

  Are you sure? yes | no

Hari Wiguna wrote 06/04/2014 at 23:19 point
I made something similar and I took lots of build photos.
http://hackaday.io/project/1355-Servo-Driven-7-segment-Display

  Are you sure? yes | no

Mike Szczys wrote 04/09/2014 at 14:13 point
Any chance we can get more details on this one? I'd love to see how everything is wired up. Where did you get all of those servos? Do you have any issue with getting the segments to line up well?

  Are you sure? yes | no

Moritz Walter wrote 03/11/2014 at 20:25 point
+1 for a video!!!

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates