Close

Power supply

A project log for DIY UV Exposure 'oven' for PCB etching and masks

Converting a towel warmer to a UV exposure 'oven' for making PCBs

fl@C@fl@C@ 03/12/2015 at 12:000 Comments

I decided to go with a 12v 5amp supply... From my tests, the most the entire system with 300 LEDs all on at one, it draws about 2.5amps.. This power supply from eBay (of course) was only $10... I don't really care for wall warts or inline power supplies so this should do nicely and allow for future expansion if I need...

Discussions