Dull an existing blade

• Take the electric carving knife blade and use your dremel tool to completely dull down blade.
• Insert the modified blade into your electric carving knife's attachment insert.
• Using a sharp kitchen knife, cut into the bottom of your silicone dildo to make a slit for inserting the modified blade attachment. Be sure to cut an insert deep enough so that your dildo will be securely lodged.
• Once you have fastened your dildo, you may plug in your electric carving knife to then experiment with!

Use Dremel Tool To Dull Blade

Make Sure To Dull All the Blade's Teeth

Dulling Blade Down

Keep it moving!

A Very Dull Blade, Indeed!

Use Kitchen Knife to Cut Insert

Make Sure to Go Deep Enough!

Insert Modified Attachment into Dildo!

Cut a new safe attachment

• Using either laser or water jet cutting, cut out our own open-source universal electric carving attachment (that doesn't have blades).
• Use a very strong plastic (we used HDPE, which was still sorta wiggly) I would reccomend water-jet cutting out of metal
• Insert the modified blade into your electric carving knife's attachment insert.

Use Kitchen Knife to Cut Insert

Carefully Make the Slit

Go Deep!

Insert Your Plastic Laser Cut Attachment into Dildo

Or Metal Water Jet Cut Attachment into Dildo

Securely Fastened

Insert Dildo Attachment into Electric Carving Knife

Connecting Dildos

Cut into it

If you have a regular silicone dildo lying around (We have MANY), cut a slot in the back, and stick the attachment into it.

Using existing holes

Lots of toys have existing holes in the back for putting in a bullet vibe. We have a Tantus toy that we used here by simply wrapping the attachment with some silicone tape to make a nice firm connection.

Use Silicone Tape To Wrap Attachment

Create a Firm Connection

Securely Fasten Tape