Making the Sensor

Conductive Thread, Resistive Thread, Conductive Fabric, Foam Sheet

• Cut the foam sheet
• Prepare conductive fabric

• Cut strips
• Mounting conductive strips
• Thread needle
• Sew conductive thread

• Stitch all the way across

• Cut thread loops
• Sew opposite side of sensor

• Looks like hair follicles!
• Begin sewing resistive thread

• Complete one side and then the other

• Make Both Threads Interact Closely!

• Back Stitching

• Final!

Constructing Circuit

Resistor, Wires, Alligator Clips, Bread Board, Breakout Board

• Materials

• Attach alligator clips to sensor

• Make Sure Clips Make Contact With Conductive Fabric
• Looking good!
• Take your breadboard
• Place Breakout Board Onto Breadboard

• Take one wire
• Attach wire to alligator clip

• Place wire in VCC insert
• Twist Your Resitor and Other Wire Together
• Clip both to other alligator clip
• Prepare to insert onto breadboard

• Your resistor goes to GND

• Remaining wire goes to D+
• Double check your connections
• Proper connection

• Attach USB to dildo/breakout board

Code Your Mod