Day 6, 7

A project log for Reflow oven controller

Reflow oven controller

lukasziwaszkiewiczlukasz.iwaszkiewicz 01/27/2015 at 08:450 Comments

Had a few problems, but firmware is more or less complete. It is as simple as it only could be. Got the casing and it seems to be to small to house the small PSU which would power the relay (relay is opto-coupled from the logic, and logic is powered from the USB) thus I'll go with external wall-wart, oh well. Tonight (when kid go asleep :D) I'll try to sketch the PCB.