• Current status. Much is actually done but still it's not finished yet.

    Jantteri • 02/17/2015 at 21:25 • 0 comments

    Current status. Assembled. Will be done some day. See the dust on servo motor :)

    • Connections:
      • 2 LDR-sensors (one for indoor ambient lightning, other for outdoor ambient lighting)
      • USB for power but also programming when needed
      • 2 push buttons for "manual mode" (Up and down)
      • On/Off -swing switch for changing between "manual/calibration and automatic modes"
      • PWM of the servo is controlled based on the difference between LDR-sensor values.
      • To do still the optimization and proper working of the Auto/Manual switching. So actually much is done and this will be done one day...