Licence

Hardware

Firmware

Schematic

PCB

We will have to print on a pre PCB negative press

PDF

Simulator

We must run the simulator with the hex file or .elf

• Proteus
• .hex
• .elf

Bill of Materials

Preparing the phenolic plate

We use a phenolic plate one face time, we reinforce the copper sandpaper water, thinner circularly

Negative PCB

With Proteus send files to print a pre-press acetate negative (there is a PDF with the file)

Fhotosensitive Film

Use and method photosensitive film

We use a paper laminator film to adhere perfectly pcb

UV Light

Add a little water between the plate and acetate so that it does not move and apply UV light

Revealed

Apply the ferric chloride are clean and ready