Close

Better design for printers without Sol. Support

A project log for Locking ball and socket gooseneck system

3D printed ball and socket joint with a quarter turn twist lock at each joint. Brick shithouse goosenecks!

Alex RichAlex Rich 03/20/2016 at 23:010 Comments

Krill3 over on Thingiverse made some nice mods to my gooseneck system, particularly to work better on 3d printers with no soluble support. Check out his page and download his files if you're interested. Here it is on one of Giufini's PCB workstations:

Discussions