drewrisingerI just got back from vacation, and am looking at ways to improve this project and its documentation on this page. Currently on the list:
- Posting pictures of finished boards
- Adding build instructions
- Getting feedback on ways to improve the boards to make them easier to use/more useful.
- I will also post links to the OSH Park site where you can buy your own boards to put together, as well as a digikey BOM (or maybe just Excel BOM) premade with all the parts you'll need to create one of these.
If you have anything you'd like to see from this project, let me know and I'll try to document it/incorporate it.
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.
I did build a board based on the 1.5 version. I however have issues getting the ESP-01 to work: I can flash software to the ESP if I press the Program button all the time while uploading. But after a successful upload, I don't get any result from the board - not even a serial print statement. I checked the 3.3V power regulation and that one works fine. What could result in such a behavior?
Are you sure? yes | no