XMOD USB CPLD Kit or Interface

Can be used as small CPLD development kit, or USB Interface: JTAG, UART, SPI, etc...

Similar projects worth following

FT2232H + Lattice XO2-256 CPLD + Pin-header with 8 user defined I/O pins.

1) use as mini developmen kit, JTAG to onboard CPLD is recognized by Lattice Diamond tools

2) use as standalone CPLD module, with 8 I/O

3) use as USB to X + Y Interface, X or Y can be: JTAG, SPI, UART, I2C, etc..

  • 1 × FT2232H Memory ICs / FIFO Memory
  • 1 × LCMXO256 Logic ICs / Programmable Logic: PLDs
  • 1 × 12MHz MEMS Oscillator

  • PCB Rev 1

    Antti Lukats07/04/2015 at 11:47 0 comments

    PCB Rev 1 production was success, there are one or to "enhancements" planned for rev 2. Rev 1 boards are ready and in active use, and can be ordered now.

    Basic configuration files for the CPLD are also done, but there is more work needed to add more interfaces, also documentation should be enhanced also.

View project log

Enjoy this project?



alpha_ninja wrote 12/07/2015 at 00:57 point

You haven't uploaded any design files yet—we need them until 23:59 UTC on Dec 8, 2015.

  Are you sure? yes | no

alpha_ninja wrote 12/02/2015 at 00:45 point

This is your one-week reminder to upload design documents:

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates