Responding to Feedback and testing.

A project log for Calibrated Prosthetic Socket for 3D Printed Arms

A 3d printed socket that will allow for on-location calibration of replacement arms.

Daniel R. DuganDaniel R. Dugan 08/19/2015 at 17:110 Comments

Made a couple changes to

  1. Increased diameter of distal cutout to better match diameter of 1/2" threaded bolts.
  2. Inverted "bolt cover" to allow for easier 3d printing in any rotation.
  3. Removed covers on "mount holes" that did not scale appropriately.