02/20/2017 at 12:50 •
A very short log entry to show how ages the pictures and to link this project with the PolaPi-Zero
I kept some prints on a desk, close to a windows, and others in a drawer. From left to right, 2 prints from the drawer, one exposed to sunlight behind a windows, and the last one freshly printed with the new version. The dates are correct, the 'old' ones are from mid '15. The papaer is Exacompta 57mm FSC No BPA .
And a detail
12/03/2015 at 20:49 •
In order to help Neil davis makes a similar camera, I found more simple to redo the entire project from scratch, and take pictures of the steps I missed.
I added more steps to the instructions part. But I'm sure I can detail more if I have time.
Here some picture of the test setup :
10/26/2015 at 10:00 •
It didn't update this project page for a while now, and I noticed petapixel.com made a nice article about it.
I would like to say I'm rather impressed how internet could spread something at light speed. It's remind me I forgot to mention this project is of course an educational pretext for myself and it was inspired by plenty of other cameras (commercial and hobby). It is not aimed to be the best quality, the cheapest, the nicer, nor even useful.
The instructions are not a nice a step by step list, I'll try to put more time on the documentation.