Close

2018-05-07

A project log for Valify V2 Robot Lawnmower

3D Printed Jetson TX2 based robotic lawnmower aims to build an "smart" robotic lawnmower using open technology

Robin FröjdRobin Fröjd 05/07/2018 at 21:070 Comments
So the last days I have been busy. All parts for the drive system was completed and tonight I finished the first test assembly of the drive system. Its a lot of parts for this part of the project and a lot of things need to be correct in order for a nice run. It took a bit of time to get it right and it was a lot of tinkering.

A quick video spinning the wheels:

Discussions