Close
0%
0%

Hackable Electronics Badge Alternate Logos

Because the hackaday logo is cooler than the OSHW logo.

Similar projects worth following
It's just a project to change the boot logo on the Parallax Hackable Electronic Badge, nothing more, nothing less.

The Parallax Hackable Electronics Badge is by far the most open conference badge ever created. It also has an OLED display. That means I can put the Hackaday logo on my badge.

  • I added the Tindie logo

    Benchoff09/19/2015 at 22:14 1 comment

    At the OHSummit, I was joined by Amber Cunningham, community manager of Tindie. While Hackaday and Tindie have the same overlords ruling over them, we can't really have Amber going around with a Hackaday logo on her badge, can we?

    ...So I spent 15 minutes putting the Tindie dog head on the badge. Pic, source bitmap, and code (poorly formatted) below.

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $80, $E0, $F0, $F8, $F8, $3C, $1E, $1E, $0E, $0F, $0F, $0F, $07, $0F, $0F

    byte $3E, $BC, $FC, $F0, $E0, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $80, $80, $C0, $E0, $E0, $F0, $F0, $78, $F8, $38

    byte $3C, $3C, $1C, $1C, $1C, $1C, $1C, $1C, $1C, $3C, $3C, $38, $78, $70, $F0, $FC

    byte $FF, $FF, $E7, $E3, $E0, $F0, $F0, $78, $78, $78, $3C, $3C, $1E, $1E, $1E, $0F

    byte $0F, $07, $07, $03, $01, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $80, $E0, $E0, $F0, $70

    byte $78, $78, $78, $38, $38, $38, $78, $38, $78, $70, $F0, $F0, $E0, $E0, $C0, $80

    byte $80, $C0, $F0, $F8, $FC, $3F, $1F, $07, $03, $01, $00, $00, $00, $00, $03, $0F

    byte $3D, $EC, $AC, $30, $00, $00, $00, $00, $00, $00, $80, $80, $80, $80, $00, $03

    byte $1F, $7F, $FF, $F1, $C0, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $3E, $FF, $FF, $F7, $E0, $E0

    byte $E0, $F0, $F0, $F0, $F0, $F0, $70, $70, $78, $78, $78, $38, $39, $39, $3F, $3F

    byte $7F, $FF, $FF, $E3, $00, $00, $00, $00, $C0, $E0, $E0, $E0, $F0, $E0, $C0, $C0

    byte $00, $01, $0F, $3C, $F0, $C0, $00, $3C, $FE, $FF, $C7, $C3, $83, $C3, $EF, $FF

    byte $7E, $10, $03, $0F, $FF, $FE, $F0, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $01, $01, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $03, $1F, $7F, $FF, $FC, $C0, $0F, $3F, $7F, $70, $70, $70, $71, $3F, $3F

    byte $1F, $00, $00, $00, $00, $07, $1E, $F8, $C0, $C1, $C1, $C1, $43, $61, $61, $60

    byte $60, $C0, $40, $60, $FF, $FF, $FF, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00, $00

    byte $00, $00, $00, $00, $03, $0F, $1F, $3E, $7C, $F8, $F0, $E0, $C0, $C0,...

    Read more »

  • Changing the Logo

    Benchoff09/14/2015 at 00:42 0 comments

    The Parallax Hackable Electronics Badge should be familiar to DEF CON 20 and 22 attendees. It's a parallax propeller with a few resistive buttons, an accelerometer, and an OLED display. The OLED display is kind of cool, and when it boots, it displays the OSHW logo. As a vetrain of the Gear Wars, I like the OSHW logo, but there's a better logo out there: the Skull and Wrenches.

    Pixelated, but the badge only has a 128x64 display. Here's the source graphic I used:

    The boot logo for he badge can be changed to the Jolly Wrencher by appending the following code to the bottom of the demo Jon McPhalen sent out for the Open Hardware Summit:

    dat {Hackaday Logo}
    
    Logo byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$01,$03,$07,$07,$8F,$FF,$FE,$FE,$FC,$F8,$F0,$80,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$80,$F0,$F8,$FC,$FE,$FE,$FE,$9F,$0F,$07,$03,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$1F,$3F,$7E
         byte $FC,$F8,$F0,$F0,$FC,$FE,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$F8
         byte $F0,$E0,$C0,$80,$80,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$80,$C0,$E0,$F0
         byte $F8,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FE,$F8,$F0,$F0,$F0,$F8
         byte $FC,$7E,$1F,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$01,$03,$03,$03,$03,$03,$03,$03,$07,$0F,$1F,$1F,$3F,$7F,$FF
         byte $FF,$3F,$9F,$CF,$E7,$F3,$F8,$F8,$FC,$FC,$FC,$FC,$FE,$FE,$FE,$FE
         byte $FE,$FE,$FE,$FE,$FC,$FC,$FC,$FC,$F8,$F0,$F6,$E7,$CF,$9F,$3F,$FF
         byte $FF,$7F,$7F,$3F,$1F,$0F,$07,$03,$03,$03,$03,$03,$03,$03,$01,$01
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$F0
         byte $FC,$FF,$FF,$FF,$FF,$7F,$3F,$3F,$1F,$1F,$3F,$3F,$7F,$FF,$FF,$FF
         byte $FF,$FF,$FF,$7F,$3F,$3F,$3F,$1F,$3F,$3F,$7F,$FF,$FF,$FF,$FE,$FC
         byte $E0,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$0E,$FF
         byte $FF,$FF,$FF,$FF,$E0,$C0,$80,$E0,$F0,$F0,$F8,$F8,$FC,$FF,$FF,$FF
         byte $FF,$FF,$FF,$FC,$F8,$F8,$F0,$F0,$E0,$80,$C0,$E0,$FF,$FF,$FF,$FF
         byte $FF,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$80,$80,$C0,$C0,$C0,$C0,$C0,$C0,$E0,$F0,$F8,$F8,$FC,$FC,$F0
         byte $C3,$8F,$3F,$7F,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$F7,$F8
         byte $F0,$E7,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$FF,$7F,$3F,$9F,$CF,$E3
         byte $F8,$FE,$FE,$FC,$F8,$F0,$E0,$C0,$C0,$C0,$C0,$C0,$C0,$C0,$80,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00
         byte $00,$00,$00,$00,$00,$00,$00,$00,$00,$00,$00...
    Read more »

View all 2 project logs

Enjoy this project?

Share

Discussions

jidipa3917 wrote 07/26/2023 at 23:20 point

Changing the boot logo on the Parallax Hackable Electronic Badge is a straightforward and exciting project. By customizing the boot logo, you can add a personal touch to your badge and make it uniquely yours. With a few simple steps, you can unlock a world of creativity (like this https://frasimag.it/) and showcase your individuality. Have fun experimenting and creating a boot logo that reflects your style and personality. Happy hacking!

  Are you sure? yes | no

debi..nalsa wrote 03/08/2023 at 01:08 point

I'm truly simply powering it through USB. In the Description I point out the opportunity of trying to energy it at once from the doorbell wires in a future generation to choose hiking boots stretching. In my specific case, I already had an outlet proper subsequent to it so USB became the smooth alternative.

  Are you sure? yes | no

Luke Beno wrote 09/22/2015 at 20:26 point

So is this the badge for the upcoming super conference?  https://hackaday.io/event/7777-hackaday-superconference

It needs an RF transceiver.

  Are you sure? yes | no

Duane Degn wrote 09/22/2015 at 22:13 point

Someone should bring a bunch of cheap nRF24L01+ modules and make some sort of wireless mesh.

I believe it has an IR tx and rx on it.

  Are you sure? yes | no

Benchoff wrote 09/22/2015 at 22:55 point

Nope.

  Are you sure? yes | no

Luke Beno wrote 09/23/2015 at 00:27 point

Brian, I'm confused about your reply?

  Are you sure? yes | no

Benchoff wrote 09/23/2015 at 03:28 point

It's not the badge for the supercon.

I don't know if we're going to do an electronic badge for the supercon. I heard *something* about it, but I don't know if that's happening.

In any event, we're going to have an electronic badge in the works for next year. That will have an 802.15.4 radio in it, and will be used as a 'mesh network chatroom' or something.

  Are you sure? yes | no

Duane Degn wrote 09/14/2015 at 14:53 point

Who needs to see the picture of the logo? Just like the guys in the Matrix it's easier to to look at the hex values, right? I found that part of the movie hard to swallow.

Thanks for posting the hex. I'll want to use it in future projects.

Apparently these badges will be available from Parallax soon. (I think they're be around $50 for one, much less if you purchase a bunch.)

If anyone wants to play with these OLED screens they're available at Itead Studio for $5.

http://imall.itead.cc/128-x-64-oled-module.html

I used one of these displays in my Propeller CNC project.

https://hackaday.io/project/4793-propeller-based-cnc-router-controller/log/16950-different-hardware

The bouncing logo code in on my GitHub but I was low on RAM so the logo is being read from a SD card each time it is moved on the screen. I plan to clean up my bouncing bitmap and inverted rectangle code once I get dropped from the 2015 Hadaday Prize. Right now I'm too busy building my robot to do anything else (but read Hackaday.io posts).

https://hackaday.io/project/4738-health-maintenance-robot

  Are you sure? yes | no

Similar Projects

Does this project spark your interest?

Become a member to follow this project and never miss any updates