0%

0%

Nikon D5100 to Adafruit Ultimate GPS adaptor

An adaptor board to connect Adafruit Ultimate GPS to Nikon D5100 DSLR camera

Following Follow project

Liked Like project

Become a Hackaday.io member

OR

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

870 views

Description

The project features the inexpensive Attiny 85 microcontroller to convert baud rate and filter the verbose nmea stream of Ultimate GPS to fit to the 4.8 Kbaud/sec serial line of camera. The microcontroller software is based on the Dual rate soft uart code of Dangerruss . (http://dangerruss-things.blogspot.hu/2011/11/dual-rate-uart-implemented-in-software.html)
The hardware uses a modified shutter connector for the camera. The modification is described here: https://grink.com/2010/12/05/nikon-d90-homemade-gps/

Discussions

Priven Michael wrote 09/21/2015 at 11:59

Hi,

There is a similar project that uses bluetooth to send GPS coordinates to Nikon camera

http://www.diyphotography.net/build-a-bluetooth-gps-unit-for-nikon/

You can use externa BT GPS module or use your smart-phone to send GPS coordinates over BT

Michael

Are you sure? yes | no

Similar Projects

An easy, entry-level setup showcasing all the features of the Microbit Robotic WiFi Camera with Electric Control from Digitspace.

Microbit Robotic WiFi Camera Setup

Get notified when your microphone or camera are being used

S.H.I.E.L.D - Is Someone Watching You?

tovi-levis Tovi Levis

ABC Camera is an interactive version of the classic letter block toys. Comes with a spelling game, and can be adapted for other software.

ABC Camera

tommi-nieminen Tommi Nieminen

AMB82 Mini Board Camera

AMB82 AI Camera

Kerron Manwaring