Close

Enter here!

A project log for The Square Inch Project

A contest to create awesome, useful square inch boards. Entries are closed.

alphaninjaalpha_ninja 09/29/2015 at 00:10237 Comments

If you'd like to enter, please post a link to your project's page as a comment on this project log!

Some reminders:
You don't need to have your PCB's schematics or circuit design finished to enter.
Each user can enter up to 10 PCBs. [One PCB per project.]
Your PCB can be smaller than 1x1".

Entered projects are listed here:

https://hackaday.io/list/7909-square-inch-project-entrants

ENTRIES ARE CLOSED.

Discussions

alpha_ninja wrote 11/06/2015 at 22:53 point

Added it :)

  Are you sure? yes | no

Will wrote 11/06/2015 at 03:34 point

I'd like to enter my watch into the competition (surprised there haven't been more of these) https://hackaday.io/project/8345-led-wristwatch

  Are you sure? yes | no

alpha_ninja wrote 11/06/2015 at 03:51 point

While that's true, I've seen many interesting ideas be entered. I'll add you :D

  Are you sure? yes | no

alpha_ninja wrote 11/04/2015 at 15:59 point

I've added it. HOWEVER, make sure the PCB fits withina 1"x1" square (one dimension is 1.02" right now.)

  Are you sure? yes | no

HappyFox wrote 11/03/2015 at 06:38 point

Hello, Could I enter this competition ? Thanks

https://hackaday.io/project/8313-1-inch-rover 

  Are you sure? yes | no

alpha_ninja wrote 11/03/2015 at 07:28 point

Of course :)
Added to the list.

  Are you sure? yes | no

A Logan wrote 11/02/2015 at 17:42 point

Hey! Could I enter this in to the competition please. Thanks :)

https://hackaday.io/project/8310-tinyotp

  Are you sure? yes | no

alpha_ninja wrote 11/02/2015 at 17:45 point

Sweet, adding! Is that a capacitive touch surface?

  Are you sure? yes | no

A Logan wrote 11/02/2015 at 17:53 point

Thank you :) And, nope, that's the ribbon connector for the OLED display, looks very similar though!

  Are you sure? yes | no

alpha_ninja wrote 11/02/2015 at 21:46 point

Ah, ok. Let's hope the boards work ;)

  Are you sure? yes | no

David wrote 11/02/2015 at 12:43 point

  Are you sure? yes | no

alpha_ninja wrote 11/02/2015 at 13:38 point

Done! I can't tell from the image, so please make sure your board fits into a 1x1 inch square.

  Are you sure? yes | no

davedarko wrote 11/04/2015 at 09:09 point

Draw a square inch on paper, and check if it fits ;) we're forgetting to think diagonally :)

  Are you sure? yes | no

danjovic wrote 11/06/2015 at 21:44 point

Yes, indeed I needed to place the components diagonally in Key Pass so they could all fit within 1x1" board.

  Are you sure? yes | no

Daniel Grießhaber wrote 11/01/2015 at 18:24 point

Hey, want to add my DIL-Duino Project: https://hackaday.io/project/8301-dil-duino

  Are you sure? yes | no

alpha_ninja wrote 11/01/2015 at 19:39 point

Added :)

  Are you sure? yes | no

Furkan Çetin wrote 10/26/2015 at 19:05 point

I want to join with my NRFBee Board! https://hackaday.io/project/8223-nrfbee

  Are you sure? yes | no

alpha_ninja wrote 10/26/2015 at 20:14 point

Adding it!

  Are you sure? yes | no

Furkan Çetin wrote 10/26/2015 at 20:16 point

Thanks! :)

  Are you sure? yes | no

alpha_ninja wrote 10/26/2015 at 20:20 point

No problem!

  Are you sure? yes | no

Daniel Grießhaber wrote 10/25/2015 at 19:50 point

I also want to enter my USB Power Meter project. I redesigned the board yesterday to fit on a square inch and switched to a different display for cooler features like graphing

https://hackaday.io/project/8197-usb-power-meter

  Are you sure? yes | no

alpha_ninja wrote 10/25/2015 at 19:55 point

Funny, I saw that project somewhere here just 5 minutes ago :P Added it!

  Are you sure? yes | no

Daniel Grießhaber wrote 10/25/2015 at 20:32 point

Yeah I saw that, thanks for the skull and thanks for entering.

working sundays, eh? :)

  Are you sure? yes | no

alpha_ninja wrote 10/25/2015 at 20:37 point

If you can call hackaday.io work ;)

  Are you sure? yes | no

danjovic wrote 10/24/2015 at 17:23 point

Another submission. Hope I can finish this up to the deadline :)

https://hackaday.io/project/8199-key-pass

  Are you sure? yes | no

alpha_ninja wrote 10/24/2015 at 17:34 point

I'm sure you'll be fine :) — Added

  Are you sure? yes | no

danjovic wrote 10/24/2015 at 17:55 point

Thanks!

  Are you sure? yes | no

Daniel Grießhaber wrote 10/24/2015 at 16:31 point

  Are you sure? yes | no

alpha_ninja wrote 10/24/2015 at 16:59 point

Yes! In fact, entry is open for four more weeks. I added your project. (btw, it sounds like incorporating an accelerometer would work nicely)

  Are you sure? yes | no

alpha_ninja wrote 10/24/2015 at 17:00 point

derp, usb. Anyway, good luck :)

  Are you sure? yes | no

mcu_nerd wrote 10/23/2015 at 16:40 point

I would like to submit my project :)

https://hackaday.io/project/8177-i2c-temp-sensor-board

  Are you sure? yes | no

alpha_ninja wrote 10/23/2015 at 17:00 point

It's on the list!

  Are you sure? yes | no

qquuiinn wrote 10/21/2015 at 03:36 point

I'd like to add my project

https://hackaday.io/project/8142-micromachine

thanks!

  Are you sure? yes | no

alpha_ninja wrote 10/21/2015 at 03:46 point

Added!

  Are you sure? yes | no

jareklupinski wrote 10/18/2015 at 02:54 point

I'd like to enter my ESP8266 AVR Programmer: https://hackaday.io/project/8103-especially-easy-avr-programming

  Are you sure? yes | no

alpha_ninja wrote 10/18/2015 at 14:15 point

Added!

  Are you sure? yes | no

Montassar wrote 10/14/2015 at 20:47 point

Hello there. I'de like to participate. My project https://hackaday.io/project/6833-open-source-smart-watch

  Are you sure? yes | no

davedarko wrote 10/14/2015 at 21:47 point

I don't see any EDA files or pictures of a board that fits the 1x1" restrictions, are you going to upload them soon?

  Are you sure? yes | no

alpha_ninja wrote 10/14/2015 at 22:31 point

They can enter for now, but these files have to be up in late November (see the rules page)

  Are you sure? yes | no

alpha_ninja wrote 10/15/2015 at 02:41 point

By the way, I'll make sure to send a reminder with all the dates that have to be considered at the 2-week-till-closing mark.

  Are you sure? yes | no

alpha_ninja wrote 10/14/2015 at 22:30 point

I'll add it.

  Are you sure? yes | no

Montassar wrote 10/15/2015 at 07:28 point

Thank you !

  Are you sure? yes | no

rampadc wrote 10/09/2015 at 23:15 point

I'd love to have Mini CC430 development board added please: https://hackaday.io/project/8016-cc430-development-board-one-square-inch

  Are you sure? yes | no

alpha_ninja wrote 10/09/2015 at 23:21 point

There you go!

  Are you sure? yes | no

bram wrote 10/09/2015 at 18:22 point

I would like to enter my capacitive touch wheel: https://hackaday.io/project/7940-capacitive-touch-wheel

  Are you sure? yes | no

alpha_ninja wrote 10/09/2015 at 19:38 point

I'll add it :)

  Are you sure? yes | no

Alex wrote 10/08/2015 at 20:26 point

Hello,

please add this: #mini SAM / https://hackaday.io/project/7996

thanks!

  Are you sure? yes | no

alpha_ninja wrote 10/08/2015 at 22:24 point

done

  Are you sure? yes | no

Alex wrote 10/09/2015 at 13:56 point

Thank you!

  Are you sure? yes | no

alpha_ninja wrote 10/09/2015 at 16:38 point

No problem :)

  Are you sure? yes | no

jaromir.sukuba wrote 10/08/2015 at 14:08 point

  Are you sure? yes | no

alpha_ninja wrote 10/08/2015 at 14:58 point

You're in.

  Are you sure? yes | no

0miker0 wrote 10/08/2015 at 12:14 point

I'd like to enter my MicroUSB powered ESP8266 Oled Display Project: https://hackaday.io/project/7990-microusb-powered-esp8266-oled-board

  Are you sure? yes | no

alpha_ninja wrote 10/08/2015 at 13:34 point

Added!

  Are you sure? yes | no