Full time C developer (network/linux/iot) in Knokke-Heist, Belgium
=========================================================

At BVBA DPTechnics we are looking at a fulltime (38h/week) embedded software developer who is passionate about networking, C and Linux. 

We develop internet connected products for our clients from idea on paper to finished product and everything in between. The company has in-house expertise on hardware design, microcontroller firmware, embedded Linux (especially OpenWRT), scalable cloud software and UX/UI design.

As an embedded developer you will be part of a young and dynamic team. Your job will mostly exist out of the following tasks:
 - Developing embedded software on OpenWRT Linux: HTTP API's, interfacing with hardware, websockets, talking I2C, SPI, Modbus, CAN-bus, ... Saving data into SQLite, ... 
 - Implementing protocol libraries or improving them (MQTT, AMQP, ...)
 - Build some Proof-of-Concept microcontroller software (STM32, ESP32, nRF52xx)
 - Extend existing software with new features or applying approvements.

We require the following skillset:

 - A minimum of a bachelor's degree
 - Very good knowledge of the C language (Pointers hold no secrets, you rather talk to registers instead of your mother in law, a union of structs is nothting special, ...)

 - Good knowledge of Linux
 - Experience with low memory computers is a plus
 - You know your nibbles, bytes, shifts and logical operations.
 - You have knowledge about common network protocols such as TCP, UDP, SNMP, MQTT, SSH, ...
 - Have knowledge about SPI, I2C, UART, CAN-bus is a plus
 
Our company is located near the coast in Belgium, in Knokke-Heist. We offer a quiet workspace with nice collegues who will always be there to help you out. We offer you a competitive salary and company car. 

Please take a look on our website www.dptechnics.com and contact us on info {at} dptechnics {dot} com. You can also give us a call on +32 50 62 13 79. You can ask for Daan (me) or Ronny.

Need labourers for a couple different businesses I own. Please reply with resume if you have experience in anything from cleaning to building or construction. 

Glen - https://www.tilecontractorswinnipeg.com/ | https://www.housecleaningstjohnsnl.com/

We are looking for a removals team in both the manchester and leeds area as well as extra cleaning staff in the Middlesbrough area

https://www.wemoveanything.com/man-van-bolton.html | https://speedyleeds.co.uk | https://www.idealcleaningcentre.co.uk/industrial-cleaning.html

Hello fellow "lectro" lovers. I'm new here so if I break any rules please let me know. I am posting on here to try and find an employer. I have an extensive skills list, and some references. I can design circuit boards, repair circuitry, diagnose circuitry, copy circuitry, I can even circuit circuitry.(lol) Like a cheesy commercial, but wait there's more. I can work, diagnose, and repair four stroke engines and two stroke. I can name most components on a circuit board and blueprints. I am 110% confident in my ability to repair anything. And I have always had to use what I had laying around. Very few times have I ever ordered new parts.(except for clients) I didn't go-to college but as soon as I get me a job in the field I enjoy then I will pursue a degree. I really believe that my full potential is being wasted, I know I could be a very valuable asset in the right hands. I'm not trying to boast. Email me at scorpiogirlep@gmail.com or call me at 6066629167 my name is John Bailey.

This is not a paid employment but for co-founding position with share in startup due to nature of how we are going to raise the capital via crowdfunding method.

We are newly founded startup initiative looking for co-founders to collaborate for a great consumer product to become a reality.

This position is for Electronics/Mechatronics Engineering who has deep knowledge of;
    •    Design and develop Arduino boards for specific task.
    •    Deep understanding of stepper motors, sensors and wireless communications.
    •    Collaborately works with Mobile Software Developer for remote controlling the board.
    •    Able to collaborate final design and working principle decisions of retail product.
    •    Mobile App Knowledge of Bluetooth/Wi-Fi technology.
    •    Troubleshooting of design problems.
    •    Product testing and documentation.

Ideal candidates must be/have;
    •    Permanent resident in Los Angeles, California.
    •    Self-motivated, disciplined, detail oriented and punctual.
    •    Ability to work independently, remain organized and make informed decisions.
    •    Deep knowledge of PCB design software (Circuit Maker, Eagle etc.)
    •    Basic knowledge of Autodesk Fusion 360 or equivelant CAD/CAM software package.
    •    Excellent communication skills both written and verbal.

Ideal candidates should have (but not necessarily);
    •    Bachelor's degree from Electronics/Mechatronics Engineering or equivelant.

We are currently working on our website, so all applications should be send to our temporary mailing address aelembic@gmail.com with your resume.

Looking for a reliable employee for a computing/accounting and admin position at my company, Brandon Painters.

Location: Brandon, MB

Web: https://www.paintersbrandonmb.com/

Numerical Control Service, Inc. is searching for a Machine Tool Repair and Rebuilding Technician.  Shop is located in Reading, PA, with customer install site in Swedesboro, NJ, slated for later this year.  

Retrofit of Natco machine tool will be primary duty.  

https://drive.google.com/drive/folders/1cFgrmigiBFegM3TPZlkSnz5oGYWTeYXK?usp=sharing

Job Description:

Able to repair and troubleshoot mechanical, electrical, hydraulic, and pneumatic systems. Skilled in interpreting and applying specs, blue-prints, engineering drawings, and work
instructions in order to perform installation, repair, and modifications to automated industrial machinery.  Knowledge of electrical wiring and systems a plus. Other duties as assigned.

Must have good oral and written communication skills.

Daily Travel in the future within 50 mile radius with option to stay overnight paid by employer.

PT, Pay DOE, Benefits

Send resume to:

Numerical Control Service, Inc.
1124 Commons Blvd.
Reading, PA 19605
ncsi@cncservice.com

EEO, M/F/Disability/Veterans

SimVentions is looking for a remote Model Based Systems Engineer. Must live in/near Washington DC Metro Area to travel to occasional meetings in DC, Fredericksburg, or Dahlgren.

Description

We are looking for a Systems Engineer to join our MBSE team dedicated to supporting our government customer in delivering integrated products with the Navy's combat systems. 

Responsibilities: 

Develop and manage MBSE initiatives supporting the CEC customer
Coordinate system integration across the Navy's CEC Combat System and NAV initiatives
Coordinate MBSE initiatives across multiple Navy stakeholders
Review and analyze system requirements and identify impacts to the appropriate requirements and/or design specifications
Identify integration issues and system requirements discrepancies across multiple systems and ship platforms.
Support system specification updates and associated performance enhancements and interface development/upgrade efforts
Required Skills and Experience:  

Minimum of 5 years of experience utilizing model-based systems and digital engineering processes, principles, techniques, and procedures in the development of Navy systems
Use of model-based systems engineering tools such as MagicDraw, Rhapsody, and/or other SysML modeling tools
Education:  Bachelor’s in Engineering, Computer Science, Mathematics, or Physics

Location:  Position can be worked remotely but candidate must live in the Washington DC Metro and surrounding areas and able to facilitate meetings in Fredericksburg, VA, Dahlgren, VA, and Washington DC.

Link: https://recruiting.ultipro.com/SIM1004SIMV/JobBoard/2e955e56-57e5-4391-9a08-7cea8953279a/OpportunityDetail?opportunityId=30fc4452-614c-4a0d-aa78-c2fe3c418cb3

SimVentions is looking for a PCB Electrical Engineer to work in Dahlgren, VA.

Description

Primarily responsible for Printed Circuit Board design, development, integration and test. Must be able to mentor junior engineers and be able to work in a fast paced environment and have a passion for learning new technologies and quickly implementing them.

Education:

B.S. in Electrical Engineering
Experience:

Minimum 6 years of experience in the following:Design, implementation, and verification of technical systems.
Demonstrated ability to provide identification of and solutions for problems with existing systems and design, and implementation of new systems.
Printed Circuit Board Design, Development, Integration and Test

Preferred but not necessary skills:Software Defined Radio design and development to include RF processing applications
SDR frameworks
Understanding of Digital Signal Processing (DSP)
Familiarization with 3GPP mobile standards and other wireless protocols

Responsibilities:

Primarily responsible for Printed Circuit Board design, development, integration and test.  Must be able to mentor junior engineers and be able to work in a fast paced environment and have a passion for learning new technologies and quickly implementing them. 

Clearance Level: Active Secret

Link to apply: https://recruiting.ultipro.com/SIM1004SIMV/JobBoard/2e955e56-57e5-4391-9a08-7cea8953279a/OpportunityDetail?opportunityId=9010a624-9294-489b-a677-b5dbd4ce8929

ThayerMahan Inc. is looking for an experienced mechanical/electro-mechanical engineer to join our fast growing team. This person will work closely with our Director of Engineering to own specific mechanical projects from design to testing and delivery while being able to work independently, using industry-standard parts and design practices. Candidates applying for this position should be able to reliably make mechanical projects converge on short timelines and be able to asses risk and failure points in a fast-paced environment.

 

Candidates must have experience in the following areas:

Design, prototyping and small-run fabrication of mechanical parts, assemblies and systems.

Integration of electronic parts, antennas and other project requirements into their designs.

Work with off-site fabrication shops when and where necessary to ensure correct and timely fabrication.

Design and fabrication with multiple and varied materials and techniques while understanding the subtleties and limitations of each.

A well-qualified candidate will have additional experience in at least one of the following areas:

Composite design and construction, including high performance carbon fiber designs

5 axis CNC machining.

Experience designing and working in maritime or subsea environments.

Experience with stress, vibration and endurance testing and simulation.

 

A well-qualified candidate will have the following skills and should feel comfortable with any of the following:

Designing parts in 3D CAD. Experience in either Autodesk Fusion360, Autodesk Inventor or Rhino3D is required.

Taking parts from 3D design to CAM. Experience in either Fusion360 CAM, Autodesk PowerMill or MasterCAM is preferred.

Fabrication experience sufficient to execute their design either manually or using CNC tools as required in-house or via contractors.

Using design models to produce basic renderings of parts and assemblies.

Using basic finite element analysis tools to improve a design.

 

Candidates will be expected to pass and maintain a security clearance at the Secret level or better.

 DM on here or email alorman@thayermahan.com

ThayerMahan Inc. is looking for an experienced electrical engineer to join our rapidly growing team. This person will be responsible for prototyping, integrating and iterating on PCBs, microcontrollers, embedded systems and the like. This person will work closely with our Director of Engineering to rapidly produce solutions to mission requirements.

An ideal candidate will have at least 5 years of work experience with a variety of projects they can speak about.
 

Candidates must have experience in the following areas:

Design, fabrication and iteration of PCBs.

The ability to exclusively own a product from design to finished assembly and testing with minimal supervision.

Experience in design using microcontrollers and embedded systems including design and programming.

The abilities to consider size, weight and power of components and sub-systems and optimize them accordingly

A well-qualified candidate will have additional experience in at least one of the following areas:

RF circuit design in the HF to UHF spectrum.

FPGA (preferably Xilinx) design and implementation.

Experience designing high-grade GPS systems from the ground up.

Significant experience using standard communications systems at a low level (Ethernet, RS-232/485, Modbus, Profibus etc…).

High-accuracy motion control and inverse kinematics (such as Stewart platforms).

 

A well-qualified candidate will have the following skills and should feel comfortable with any of the following:

Soldering, including hot air rework, BGA and surface mount components.

Experience in either Altium Designer or KiCad is required.

Test equipment such as spectrum analyzers and vector network analyzers.

Designing and implementing custom testing hardware to validate systems they have designed.

Experience in C/C++ for microcontrollers.

Experience in low-power linux embedded systems.

 

Candidates will be expected to pass and maintain a security clearance at the Secret level or better.

DM here or email alorman@thayermahan.com

Embedded Software Engineer - Punch Through (Minneapolis, MN)

We are Punch Through, a team of engineers and problem solvers who thrive on learning, doing, and teaching. We care about each other, about the products we work on, and we are driven by empowering ourselves and others through learning.

Our culture is what motivates us to work together every day. Punch Through culture is focused on humble collaboration and candor, creativity, adaptability, accountability, ethical decision-making, and most of all, teaching & learning from each other and our clients. Our desire to subscribe to these values is arguably more important to our accomplishments than our technical proficiency alone.

Do you have a real passion for engineering and product development? Do you like the idea of checking your ego at the door, the same as your teammates, then focusing on the task at hand? Are you as driven by the opportunity to create high-quality solutions as you are by completing a project?

If your answer to all of those questions is yes, then we are looking for an experienced individual like you to join our Minneapolis team in an embedded software engineering position.

Responsibilities

- Write firmware for connected products

- Coordinate technical approach and development with team members

- Collaborate with clients to determine their needs

- Assist definition of product requirements and specifications

- Engage in continued improvement of team’s best development practices

Skills and Qualifications

- 3-5 years experience developing on embedded platforms, from architectural inception through production

- Experience with a variety of toolchains and development environments

- Experience with firmware and/or software test and automation

- Experience designing data transfer and command protocols

- Experience with embedded RTOS and bare metal development

- Experience bringing up and debugging hardware using logic analyzer, oscilloscope, etc.

- Experience with higher level programming languages is a bonus

- Experience with regulated devices is a bonus

- Experience with Bluetooth Low Energy is a bonus

Visit https://punchthrough.com/ for more information on our organization.

If you are interested, please apply and send an email including your resume to jobs@punchthrough.com

This position is based in Punch Through’s Minneapolis office. No relocation offered.

Android Developer - Punch Through (Minneapolis, MN)

We are looking to hire developers to build Android applications that interact with the physical world. You will have an opportunity to develop software for projects that involve hardware integration, user interaction, cloud connectivity, and more. Punch Though is the leader in Bluetooth Low Energy wirelessly connected products, working with clients ranging from stealth start-ups to Fortune 500 companies in the medical, consumer, and industrial spaces.

Responsibilities

- Architect, implement and test scalable Android apps with a focus on optimal user experience

- Work with clients or partners to determine project needs and define ideal technical solutions

- Scope client projects and coordinate with other team leads to determine schedule and tasks

- Provide technical leadership to other project engineers

- Promote the adoption of best practices in software development

- Mentor junior engineers and enjoy learning from other team engineers

Skills and Qualifications

You should be proficient at native Android development using Java or Kotlin, preferably both. We are also interested in those who come from an iOS background but would like to learn Android. Experience with the Android MVVM paradigm as well as popular Android libraries like Dagger 2 is a bonus.

Our ideal employees are versatile and have skills that overlap multiple layers. If you have a good foundation in other platforms as well as mobile, this is a plus.

- 5+ years developing software applications

- 3+ years developing software for mobile platforms (Android preferred)

- Experience with Android MVVM and LiveData architectural pattern a plus

- Experience designing and implementing communication protocols

- Experience interfacing with RESTful and other backend APIs

- Experience implementing user interfaces in mobile applications

- Experience interacting with external clients

- Motivated to learn skills that encompass a multitude of software platforms

- Self motivated, detail oriented, team player

- Open to feedback and comfortable giving constructive feedback

Culture

Punch Through's culture is focused on humble collaboration, teaching & learning from each other, innovation, creativity, adaptability, accountability, ethical decision making, and most of all, happiness & passion for our work.

Visit https://punchthrough.com/ for more information on our organization.

If you are interested, please apply and send an email including your resume to jobs@punchthrough.com

This position is based in Punch Through’s Minneapolis office. No relocation offered.

Prototype Specialist, Stanley Black & Decker, Towson, MD

https://sjobs.brassring.com/TGnewUI/Search/home/HomeWithPreLoad?PageType=JobDetails&partnerid=165&siteid=20&AReq=60902BR&codes=WMB#jobDetails=827438_20

Updating everyday since 2017 ?

Massdrop.com is looking for a Director of Product Marketing for Hardware in San Francisco, CA -

Https://boards.greenhouse.io/massdrop/jobs/1446250

Postdoctoral Position Available in Natural Language Processing

I have a position open for a postdoctoral scholar in my lab, primarily centered around a project in explanation-centered inference (more details below). Folks with interdisciplinary backgrounds (for example, but not limited to: cognitive science) are encouraged to apply — the most important qualifications are that you’re comfortable writing software, that you’re fascinated by the research problem, and that you feel you have tools in your toolbox (that you’ll enjoy expanding after joining the lab) to make significant progress on the task.

The start date is flexible, and we’ll review applications as they come in until the position is filled. If you have any questions, please feel free to get in touch: pajansen@email.arizona.edu

—

Postdoctoral Research Associate I https://uacareers.com/postings/31213

Position Summary The Cognitive Artificial Intelligence Laboratory ( http://www.cognitiveai.org ) in the School of Information at the University of Arizona invites applications for a Postdoctoral Research Associate for projects specializing in natural language processing and explanation-centered inference.

Natural language processing systems are steadily increasing performance on inference tasks like question answering, but few systems are able to provide explanations describing why their answers are correct. These explanations are critical in domains like science or medicine, where user trust is paramount and the cost of making errors is high. Our work has shown that one of the main barriers to increasing inference and explanation capability is the ability to combine information – for example, elementary science questions generally require combining between 6 and 12 different facts to answer and explain, but state-of-the-art systems generally struggle integrating more than two facts together. The successful candidate will combine novel methods in data collection, annotation, representation, and algorithmic development to exceed this limitation in combining information, and apply these methods to answering and explaining science questions.

A talk on our recent work in this area is available here: https://www.youtube.com/watch?v=EneqL2sr6cQ

Minimum Qualifications – A Ph.D. in Computer Science, Information Science, Computational Linguistics, or a related field. – Demonstrated interest in natural language processing, machine learning, or related techniques. – Excellent verbal and written communication skills

Duties and Responsibilities – Engage in innovative natural language processing research – Write and publish scientific articles describing methods and findings in high-quality venues (e.g. ACL, EMNLP, NAACL, etc.) – Assist in mentoring graduate and undergraduate students, and the management of ongoing projects – Support writing grant proposals for external funding opportunities – Serve as a collaborative member of a team of interdisciplinary researchers

Preferred Qualifications (One or more of the following would be a strong benefit -- note not required for application) – Knowledge of computational approaches to semantic knowledge representation, graph-based inference, and/or rule-based systems – Experience applying machine learning methods to question answering tasks – Knowledge of or interest in graphical visualization and/or user interface design – Strong scholarly writing skills and publication record

Full Posting/To Apply https://uacareers.com/postings/31213

Contact Information for Candidates Questions Peter Jansen ( pajansen@email.arizona.edu )

Hey guys, the famous Hollywood special effect company "Legacy Effects" (http://www.legacyefx.com/) is looking for a few smart extra folks with electronics/robotics experience. Even if you are not crazy smart, give them a try, we are looking for assistants all the time. Contact career dept for info: hireme@legacyefx.com

Engineering technician with 4 years of experience working with electronics, 1 year designing control hardware and electrical design.

Out of the office I do CNC, 3d printing rapid prototyping. Currently

 developing several different rapid prototyping machines including CNC, fdm 3d printing, SLM 3d printing and multi use machines.

In Grand Rapids Michigan and I'm interested in either finding co-founders or a company that has work in my fields of true interest.

Filament is looking to fill two positions (Firmware & Hardware Test Engineer) at our Reno, NV office.

Who We Are

Filament (www.filament.com) builds blockchain hardware and software solutions for the enterprise and Industrial Internet of Things (IIoT), allowing companies to securely connect devices and machines that interact and transact value independent of a central authority. We are growing rapidly and looking for an exceptional Firmware Engineer. Reporting to the Hardware Engineering Manager, the Firmware Engineer will be responsible for the design and development of firmware at Filament.

FIRMWARE ENGINEER

Key Responsibilities

Design, build, test, and launch firmware according to schedule.
Gather and analyze feedback from internal & external users on the key strengths and weaknesses.
Optimize the firmware based upon that feedback and analysis. Identify critical bugs and implement solutions in a timely manner.
Collaborate leaders to continuously improve the firmware by integrating internal and external user feedback.
Design, build, and demo a refined / enterprise version of the product on a given timeline.
Achieve monthly firmware engineering metrics.
Ensure a focus on continuous improvement, striving for sustained superior products measured by bug rates after release, customer satisfaction, and high penetration testing marks.
Offer innovative ideas and solutions and encourage others to share theirs with the wider team.
 

Minimum Requirements

Superior abilities using C/C++, git, and Linux (any distro).
At least 5 years of firmware, device driver, or equivalent experience.
Demonstrated experience with debug of active product issues and root cause analysis providing solutions and workarounds for customers.
Experience with ARM CortexM series and/or Espressif ESP32.
Proficient with various development tools such as SWD/JTAG debugging, J-Link, GCC and ARM Keil.
Experience developing applications for embedded Linux, RTOS, and bare-metal systems.
Ability to write hardware drivers against a datasheet.
High level knowledge of analog and digital circuitry.
Understanding of software/hardware design tradeoffs (cost & performance).
Deep knowledge of software architecture and/or protocols.
Experience developing embedded firmware running on SOCs and SOMs.
Javascript competence.
Awareness of customer-facing consequences of technical choices, and the ability to convey them to team members that are not programmers.

 
 

HARDWARE TEST ENGINEER

Key Responsibilities

Design, develop, deliver, and oversee test plans, procedures and schedules to verify and validate designs and qualify manufacturing processes for Filament’s current products.
Execute test cases for current product. Analyze test results, identify high risk areas, and author design verification test reports.
Collaborate with the Hardware Engineering Team to monitor defects, resolve issues, and improve unit test results by 50%. Provide training and ongoing support to production test technicians throughout the year.
Monitor and discuss progress against key metrics with the Hardware Engineering Manager weekly and adjust processes as necessary.
Actively participate in weekly risk analysis to help determine the correct priority order for test execution.
Ensure a focus on continuous improvement, striving for sustained superior products measured by unit tests, integration tests, and on-schedule delivery.
 In collaboration with Hardware Engineering Team, troubleshoot and address bugs within 10 business days of identification.
Support the Hardware Engineering Manager to improve Filament’s products and services by providing frequent and thorough information on hardware engineering opportunities and threats that can help to drive the overall company strategy.
Communicate and collaborate effectively across Filament’s functions to communicate challenges and solutions, build trust, and produce best in class hardware engineering solutions. Adopt a metrics-driven but collaborative approach that prioritizes meeting Filament’s strategic goals.
Be a positive team member. Offer innovative ideas and solutions and encourage others to share theirs with the wider team.
 
Minimum Requirements

BS, MS in Electrical Engineering required and/or 4 - 5 years of relevant experience.
Strong electrical engineering fundamentals.
Knowledge of Visual Basic or C/C++.
Demonstrates strong design and/or test skills.
Demonstrates managing through ambiguity and technical problem-solving skills.
Excellent interpersonal, influencing, leadership, verbal and written communication skills required.
Hands-on experience in the development of high-volume consumer electronic product is desired.
Demonstrated ownership of multiple sub-systems and/or a complete simple product
Demonstrate specific re-work skills required for this position. Specifically, the candidate should be able to perform wire wrapping and soldering of 0402 SMDs.
 

Send your resume to Stacey@filament.com