11/21/2017 at 14:08 •
Hello Mooltipass Enthusiasts!
It truly was a pleasure meeting some of you at the Hackaday supercon!
We were extremely happy to announce our third generation of Mooltipass devices and show the great work we have been doing on our replacement App Moolticute.
You should therefore expect many exciting news in the coming weeks and may find our slides here in the mean time: https://drive.google.com/open?id=1t7G9zvdcBC5vZUtKzRqpzT6snE5rA1YhhKer02RPXMc
As the development work on the next Mooltipass has just started, now is the best time to join our team of contributors! Do not hesitate to contact us at contributors[at]themooltipass[dot]com to start working on some great technical challenges.
Mathieu & the Development Team
04/24/2017 at 20:25 •
After raising than $168k, we finally shipped out all our backers items! It was quite an adventure... but luckily we still had the training from our first Indiegogo campaign.
We now finally support Firefox and Safari, and are gathering quite a large community. It's great to see how the Mooltipass project evolved!
We have enabled orders on our tindie shop!
11/04/2016 at 12:29 •
Dear Mooltipass Enthusiasts,
As there are only 3 days left before the end of our Kickstarter campaign we would like to thank you for your continued support. Our current funding level (295%) is a testament to that, and this last month has been amazing for us. We are thrilled to see that more than 1450 users chose to support our hard work and believe in the Mooltipass project!
Many well known companies also contacted us and expressed interest in the Mini! They were particularly motivated by the fact that they could audit and modify the Mini source code to meet their specific requirements. You may also have noticed that we are currently testing Safari and Firefox support. In the following video you can see a demo of the Mini functioning with Chrome, Firefox and Safari side by side.
If you haven't done so already, keep in mind these are the last few days you'll be able to grab a Mooltipass Mini at a preferential price - after our campaign, the Mini will be priced around $85.
Have a great week,
Mathieu and The Development Team
10/10/2016 at 14:35 •
We are live !
Dear Mathieu Stephan,
The long wait is over: the Mooltipass Mini crowdfunding campaign is live on Kickstarter!
We are extremely happy to present you with our final device, which has already passed FCC and CE certifications. This effectively means your device can be shipped to your door the moment it leaves the production chain!
Compared to the Mooltipass standard you know, the mini has the following advantages:
- Smaller size: 79 x 37 x 12mm
- Cheaper: $50 early bird price, $85 retail
- Faster input method: clickable scroll wheel
- More intuitive: we implemented your suggestions!
- Scratch resistant: case made of anodized aluminum
There are only a limited quantity of early bird rewards so make sure to visit our campaign the very moment you receive this email!
We would also like to take this opportunity to thank our 50 beta testers who relentlessly tested the Mooltipass Mini over the past several months, ensuring our device would suit everyone's needs while remaining intuitive to use.
And lastly, we'd be eternally grateful if you could spread the Mooltipass word around you so that we can help everyone with our safe and secure password management solution!
09/20/2016 at 19:03 •
Dear Mooltipass Enthusiasts,
During these last 6 months the Mooltipass team has been working hard developing the Mooltipass Mini.
Today we are extremely pleased to announce that in exactly two weeks we will launch a kickstarter campaign for it.
Compared to the standard Mooltipass, the Mini therefore has the following advantages:
- smaller size: 79x37x12mm
- scratch resistant case made of brushed anodized aluminum
- cheaper price: early bird price of $50
- faster user input using a clickable wheel
- several key firmware improvements
You may be notified of the campaign launch by entering their email on our website (scroll to the end of the page to get the small popup) !
06/08/2016 at 06:07 •
I hope you'll be as happy as we were when we received these pictures.
Please note the plastic will be semi-tinted to make the mini look black. It'll also be (if all goes well) ultrasonically welded shut. Don't forget to answer our call for reviewers & testers here: https://docs.google.com/forms/d/1MkAny03AB3Qt2d9JocE-chRrzwXpfTQgM3uP0dVMQtw/viewform
Let us know what you think of the Mini!
05/03/2016 at 18:54 •
Dear Mooltipass enthusiasts,
We're extremely excited to announce that our current Mooltipass Mini beta testers program is going extremely well, and that a bit more than a week ago we started a Mooltipass Mini pre-production batch!
If everything goes well, in 2 or 3 weeks 30 units will be shipped to lucky individuals.
You're therefore more than welcome to take a few minutes of your time to answer this call for reviewers and testers !
Don't hesitate to share this link with friends and family interested in having a Mooltipass Mini, asking them to put your email as a reference to increase your chances in getting one.
These devices will (almost) be identical to the ones shipped when (if) our upcoming Kickstarter campaign succeeds!
Have a great day,
Mathieu & the development team
03/15/2016 at 19:53 •
Aren't they pretty?
03/05/2016 at 18:20 •
Dear Mooltipass Enthusiasts,
A little more than a month ago we announced that the development team and I were working hard on a small Mooltipass device.
Today we're extremely happy to send you the very first picture of our current prototype:
We're also glad to report our target retail price: $50 ! But now we need you.
As with our first Mooltipass device we are planning to work hand in hand with ~10 beta testers for the next few months to make sure that our device will please everyone. These prototypes will be manufactured, soldered and assembled by us so we created a quick form for you to apply to the beta testers program.
If you're therefore interested in participating to this great adventure and have a direct impact on the device development process, please fill this form: https://docs.google.com/forms/d/11idL3dzKXHzPuY4K99v4ipEwpYHKDX-q-HvppXwhjEM
Don't hesitate to spread the word and send this form to your friends and family!
We'll also organize a (very small) first production run in (hopefully) less than two months, to prepare for our future crowdfunding campaign. As you can guess, we're looking forward to being able to send this new Mooltipass to you!
Have a nice weekend,
Mathieu & the Mooltipass Development Team
PS: As always, if you want to talk to the team and community, we're on #mooltipass on freenode.
01/31/2016 at 17:38 •
The Mooltipass team and I would like to wish you all a (late) happy New Year and hope that you are doing well.
Following the success of the Mooltipass device, we are extremely happy to report that a Mooltipass Mini is currently being designed.
Like its name suggests, this Mooltipass will basically be a smaller version of our current Mooltipass with noticeable differences:
- a small joystick based input interface instead of our current tactile one.
- a 2" 128x32 pixels OLED screen instead of our current 3.12" 256x64 pixels one
- (hopefully) a wheel encoder on the device's side to quickly browse through the credentials
The Mooltipass Mini will be less than half the size of our current Mooltipass for less than half its price.
In a month or two, we'll therefore be looking for beta testers. Feel free to invite your friends and family to our google group to stay informed.
In the meantime, please feel free to use this thread to give us suggestions on what you'd like to see in this small Mooltipass.
Cheers and have a nice weekend!