Quantity   Component name
1 × perfboard or stripboard at least 18x24 holes
7 × 220 Ohm resistors enough to protect all LEDs and provide load on voltmeters
1 × 470uF capacitor Protection on power rails
1 × SSD-1306 I2C OLED display 128x64 pixels on 0,96 inch screen
2 × IKEA GOTTLOSA knobs Kitchen knobs or joystick knobs
1 × 3-axis joystick Model JH-D400X-R2
1 × Arduino Mini Pro Handle switches, LEDs and shift register, could be exchanged by ATMEGA8
1 × Arduino Micro Pro Handle USB connection, MiniPro UART proxy and USB joystick emulation
2 × LED (yellow) warning indicator (low power/low fuel)
5 × LED (red) warning indicator (overheat) and OFF indicators
4 × LED (green) ON indicators
2 × 10-50k potentiometer Throttle and timewarp control
1 × TPIC6B595 8-bit shift register Or any '595 shift register to have more pins for LED indicators
1 × HD44780 16x2 display with I2C 1602 bus adapter Semiconductors and Integrated Circuits / Misc. Semiconductors and Integrated Circuits
5 × ON-OFF switches
2 × ON-OFF-ON switches
1 × big red mushroom emergency pushbutton
2 × DC 0-5V analog voltmeter panels
1 × IKEA LACK shelf The white square
2 × X/Y joystick module like KY-023