1. Read V1 status via custom serial protocol using Arduino.
2. Connect HUD to the Arduino wirelessly.
3. Show detections and strengths to rider via LEDs.
4. Implement sleep mode when bike/V1 not running.
5. Show rider neutral gear, indicator, and high beam statuses via LEDs.


1. Reads from V1 but does not reply/send back to V1
2. Bluetooth vs. Xbee (showdown continues)
3. Trialling best way to place SMD LEDs in helmet.
4. 0%
5. Investigating non-invasive method to sense voltage status of loom.