Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer

All Projects

 
11.2k
179
143
A high speed and high torque robotic actuator using low-cost brushless motors, custom controller, 3D printed parts and bearings.
Project Owner Contributor

3D Printed Robot Actuator

Paul GouldPaul Gould

3.4k
107
30
printed - using only PETg, no flex filament needed integrated NEMA17 stepper motor only three small parts for tolerance compensation
Project Owner Contributor

3D Printed Strain Wave Gear

Johannes HasslerJohannes Hassler

2.2k
36
35
Put screens on your jewelry.
Project Owner Contributor

Video Pendant

ðeshipuðeshipu

10.7k
90
113
... is designed for direct drive wheels for swarm robots
Project Owner Contributor

PCB stepper motor

bobriciusbobricius

7.3k
81
69
An Open Source Linear Actuator
Project Owner Contributor

Linear PCB Motor

Carl BugejaCarl Bugeja

24.3k
264
240
A smaller and cheaper open source brushless motor.
Project Owner Contributor

PCB Motor

Carl BugejaCarl Bugeja

3.1k
33
17
IMU-based encoders. IMcoders provides odometry data to robots with a minimal integration effort, easing prototyping on almost any system.
Project Owner Contributor

IMcoders

Pablo LeyvaPablo Leyva

562
19
11
A 75 watt MPPT Solar Charger with tons of features. Efficiency > 97%, USB interface, data logging, 2 USB charging ports and much more...
Project Owner Contributor

High Efficiency MPPT Solar Charger

Lukas FässlerLukas Fässler

2.9k
79
25
Affordable and open-source LIDAR based on 3x VL53L0X ranging sensor
Project Owner Contributor

xLIDAR

JRodrigoJRodrigo

10.5k
175
83
The WorkHorse 3D Printer gives anyone the power of a factory. A custom robotics module on the printer automatically ejects print jobs.
Project Owner Contributor

Autonomous Infinite 3D Printing: WorkHorse 3D

Swaleh OwaisSwaleh Owais

760
12
11
TMS9918A video card for the RC2014
Project Owner Contributor

rc9918

J.B. LangstonJ.B. Langston

2.5k
53
25
A low cost yet rigid & precise robot module
Project Owner Contributor

3D Printed Servo Linear Actuator

Michael GrahamMichael Graham

2.6k
33
24
A low cost, high precision haptic robotic arm with 50 micron repeatability and modular end effectors
Project Owner Contributor

Dexter

Haddington DynamicsHaddington Dynamics

1k
12
8
Zn-Cu stomach acid based bio-galvanic cell powers a hacked activity tracker small enough to swallow and reconfigured as a 'smart pill'.
Project Owner Contributor

Stomach Acid Powered Smart Pill

Curt WhiteCurt White

153k
1.7k
893
A printable robot arm, a little bigger than the usual hobby servo once.
Project Owner Contributor

3D Printable Robot Arm

Andreas HoelldorferAndreas Hoelldorfer

5.6k
44
92
A new kind of electronic prototyping!
Project Owner Contributor

HEXABITZ - Modular Electronics for REAL

HexabitzHexabitz

10.3k
109
112
A low cost ESP32 core board with Ethernet and PoE for convenient "single cable" deployments
Project Owner Contributor

wESP32: Wired ESP32 with Ethernet and PoE

Patrick Van OosterwijckPatrick Van Oosterwijck

1.9k
17
14
Robot on a PCI-e Stick (ROPS) is a project to provide a flexible I/O solution for ROS robots.
Project Owner Contributor

ROPS

CalebCaleb

151
9
7
University digital Logic Learning Xtensible board release 3 with SDRAM
Project Owner Contributor

ulx3s

radiona.orgradiona.org

100k
2.4k
658
Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.
Project Owner Contributor

ODrive - High performance motor control

Oskar WeiglOskar Weigl

1.9k
30
27
EPS32 Based RGB Display that uses the APA102-2020 LED
Project Owner Contributor

PIXO Pixel

Sean HodginsSean Hodgins

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2018 Hackaday