Projects brooksware2000 likes and follows

Sort by:

A project to design, build and fly a 3D printed high power model rocket air-frame, capable of flying with up to a K Class motor.

Fully 3D Printed Level 1-2 NAR Cert Rocket

Mitchell O'Connor

A mostly printed digital microscope powered by a Rasperry Pi Zero W

Pi Microscope

A touchscreen control panel for Grbl controllers with MPG handwheel and hardware inputs.

Touchscreen Control Panel for Grbl

a custom three axis cnc machine for carving candles.

CNC Candle Carver

Automatically detects when a blower gate is opened and turns on the collector motor

Just Another Dust Collector Controller

Easy to build but very capable and handy DIY solder paste dispenser built mostly from cheap Ebay components and modules.

Low cost solder paste dispenser

kevarek kevarek

3d printed 40:1 Cycloid gear actuator module using Tarot 4008 (330kv) motor and MJ-VESC Circular Type Motor Controller Inside.

(40:1) 3D Printed Cycloid Gear Actuator Module V2

It's a clock that draws it's time using falling tetris blocks. Uses and ESP32 and a RGB LED Matrix

WiFi Tetris Clock

Color changing words tell you the time...

8x8 RGB LEDMatrix Desktop Word Clock

Just add your own enclosure, 12V adapter and UV LED strip!

DIY UV Light Box Controller For SLA 3D Prints

sjm4306 sjm4306

I sat down and wrote a C compiler from scratch and documented every step of the journey.

Writing a C Compiler from Scratch

Chipsat dev board for low-power, embedded computing in space

Junebug

A version of the SMD tape magazines that have built in DIN rails mounts

Modified SMD tape magazines

Open Source tested and Proven Model Rocket TVC Gimbal

K-9 Rocket Thrust Vector Control Gimbal

Canine-Rocket-Technologies

Robust yet simple and relatively cheap linear actuator for hobbyists !

Robust linear actuator

A tabletop arcade machine based off a Raspi Retropie

Tabletop Retropie Arcade

A small USB powered acrylic lamp with RGB lighting and serial interface

RGB Acrylic LED Lamp

TeraDMX is fully isolated DMX LED DIMMER Shield for Arduino is designed to connect your project to professional large size DMX networks.

TeraDMX – Arduino DMX Dimmer Shield

StepperMotorFeatherWing with Trinamic TMC5130A-TA drivers for two stepper motors compatible with Adafruit Feather

StepperMotorFeatherWing

This is a seven segment display based on addressable 5050 ws2812B RGB leds aka Neopixel leds . Each segment on the display conatins 2 Leds.

RGB SEVEN SEGMENT DISPLAY

ESP8266 12E based hardware running Sinric firmware, enables Amazon Alexa to control appliances

EchoDe : Amazon Echo Controlled Appliances

Aditya Mukherjee