Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects wjlove likes and follows

27.3k
6.1k
75
Creating home automation sensors and controllers that can be used around the house forming a mesh network for communication
Project Owner Contributor

Home automation using RF mesh network and arduino

LewisLewis

5k
3.8k
23
Design for 3D printed Helmholtz Coil that can be configured for any wire size, number of wraps and magnetic strength
Project Owner Contributor

Highly Configurable 3D Printed Helmholtz Coil

ChasinSpinChasinSpin

18.9k
2k
36
The Teensy Audio Spectrum Analyzer is a low-cost classic audio spectrum display with up to 128 bands.
Project Owner Contributor

Teensy Audio Spectrum Analyser

Nick MetcalfeNick Metcalfe

1.7k
1.7k
4
Simple ,Easy to use,Small size,Light, High Cost-Effective
Project Owner Contributor

Water Level Sensor Module for Arduino AVR ARM STM3

icstationicstation

835
1.6k
9
A projects where I connect christmas tree lights to my twitter account and make some minions dance and sing.
Project Owner Contributor

The IoT Holiday Lights Project

Inderpreet SinghInderpreet Singh

936
1.5k
4
In my professional life I deal with serial devices Ad Nauseum. Sometimes they're remotely located. This makes remote control easier!
Project Owner Contributor

Send serial to Comtrol Devicemaster with Arduino

RoboMonkeyRoboMonkey

7.1k
1.2k
31
Managing ESP8266, interfacing to old workhorse 8051 and controlling electrical loads over WiFi network from an Android based cell phone.
Project Owner Contributor

ESP8266+8051+Android phone

ucpatnaikucpatnaik

793
1.2k
5
another ion wind loudspeaker in development
Project Owner Contributor

IW blower 4 - 3d printing test

DeepSOICDeepSOIC

1k
1k
2
Control Voltage and Volume Pedal hacked from dead Wah.
Project Owner Contributor

Korg Delta CV & Volume Pedal Hack

ScissorfeindScissorfeind

1.2k
904
3
STEAM Project that combine multidisciplinary areas of technology to raise awareness around user centered design for aging populations.
Project Owner Contributor

Tea Dunker STEM / STEAM Project

NickcasioNickcasio

677
773
7
An embedded development platform for connected devices, with Node, Rust, Python support, USB, IO, WiFi, and Ethernet. Tessel.io
Project Owner Contributor

Tessel 2

KelseyKelsey

120
582
3
Superbooks
Project Owner Contributor

bubblin

Marvin DanigMarvin Danig

211
546
2
Using available data, science, programming and black humour to prove that the map is not the territory
Project Owner Contributor

Debunking a geographical myth

shagershager

62.7k
544
448
Remaking the PDP-8/I using the Pi, simh & a replica front panel
Project Owner Contributor

PiDP-8/I

OscarvOscarv

9.7k
492
12
Can be used to replace old AVR regulator for AC 3 phase alternator.
Project Owner Contributor

Automatic Voltage Regulator for AC alternator

Michael SkrepskyMichael Skrepsky

1.2k
436
3
Industrial project to replace time delayed electromechanic system with Atmel powered mictocontroller.
Project Owner Contributor

Replace timer-electromechanic switch

k-angelisk-angelis

2.1k
400
19
Motorizing and increasing the capacity of a 3D-printed compost shredder
Project Owner Contributor

Compost Shredder Upgrade

Will F.Will F.

12k
383
8
Build a receiver to open/close your garage door with an app. Visit BlueMate.com
Project Owner Contributor

GarageMate DIY Kit

BlueMate.comBlueMate.com

13.8k
186
45
The aim of this project is to make a desktop cnc machine with at least A3 working area (420x297 mm), Z < 100mm with sub 300 EUR budget.
Project Owner Contributor

CNC desktop laser/dremel mill/microscope

KertKert

1.2k
63
7
WIFI Gas Sensor (CO, Hydrogen, Nitrogen) detects the present of the gas and sends signal to a server on a selectable IP address and TCP port
Project Owner Contributor

WIFI Gas Sensor

Horacio BouzasHoracio Bouzas

3k
52
49
What's a breadboard?
Project Owner Contributor

Random-Ass Breakouts

JarrettJarrett

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2022 Hackaday