Close

Your browser (Internet Explorer) is out of date.

Update your browser for more security, comfort and the best experience on this site.

Update Internet Explorer'

Projects Tom Janssens likes and follows

118.4k
1,548.5k
2.5k
Follow for the 'Hacklet' and latest news about hackaday.io
Project Owner Contributor

Hackaday.io Project

lutetiumLutetium

16.8k
16.2k
55
A home automation solution that utilizes a Raspberry Pi server, 433MHz radios, and an Android app.
Project Owner Contributor

Low Cost Home Automation

daniel-hankewyczDaniel Hankewycz

17.1k
13.7k
29
This open-source, low-power LTE shield uses cutting-edge CAT-M technology and also integrates GNSS location capabilities!
Project Owner Contributor

LTE CAT-M1/NB-IoT Shield for Arduino

timothy-wooTimothy Woo

16k
10.2k
54
Fully functional floor piano, with midi in/out, leds and training mode.
Project Owner Contributor

Cheap Expandable Floor Piano

fredericFrederic

7.5k
7.3k
46
An Arduino controlled infinity mirror mask. You can even see while wearing it!
Project Owner Contributor

Infinity Mirror Scuba Mask

curt-whiteCurt White

7.1k
6.8k
27
Design for 3D printed Helmholtz Coil that can be configured for any wire size, number of wraps and magnetic strength
Project Owner Contributor

Highly Configurable 3D Printed Helmholtz Coil

chasinspinChasinSpin

6k
5.6k
18
This solution has a number of unique benefits, a sensor platform with webserver, powered over Ethernet, accessible and programmed by browser
Project Owner Contributor

IoT Ethernet Sensor using Power over Ethernet

deandobdeandob

5.5k
5.4k
27
I wanted to make my own helmet cam which would also show data about what was going on (e.g. speed, altitude, temperature).
Project Owner Contributor

Raspberry Pi GPS Helmet Cam

martin-ohanlonMartin O'Hanlon

5k
5.1k
7
was given a Raspberry Pi as a gift and have been on a mission to learn everything it can do.
Project Owner Contributor

Raspberry PI

hatterofthewasteHatterofthewaste

5.1k
4.8k
55
The most integrated FPGA module as of 2017
Project Owner Contributor

The 'Configum-2' FPGA module

knvdKn/vD

10k
3.8k
26
Fully open source remote control for common electric skateboards using the NRF24L01+
Project Owner Contributor

Open esk8 Remote - v1

timo-birnscheinTimo Birnschein

17.1k
3.7k
70
Development of a robust low cost 3D printed hand prosthesis using off-the-shelf components.
Project Owner Contributor

biohand - Low cost 3D printed hand prosthesis

martin-vincent-bloedornMartin Vincent Bloedorn

3.8k
2.5k
17
Octoshield is a Raspberry Pi shield to help with 3D printing and Octoprint.
Project Owner Contributor

Octoshield

goodwinGOODWIN

1.8k
1.6k
13
A workshop on IOT including a simple IOT device using Wemos D1, a DS18B20 temperature sensor, a battery shield and a rechargeable battery.
Project Owner Contributor

Simple IOT

radu-motisanRadu Motisan

1k
1.1k
15
IR Remote Control based on ATtiny13A
Project Owner Contributor

ATtiny13A TinyRemote

stefan-wagnerStefan Wagner

287
719
4
REMOTE CONTROL of 2 momentary contacts 1 at a time via 2 wires
Project Owner Contributor

REMOTE CONTROL via 2 wires

boelens-lelandBoelens, Leland